Zyxel Zyxel C1000z: problems connecting to wifi

Greetings Phane7!

May I ask, is your ZyXEL C1000Z operating in bridge mode, or router/NAT mode?

If it's possible, can you try connect your Xbox directly in to the ZyXEL C1000Z, and verify if you can connect properly to Live, or not.

Thanks!

Thanks for the reply I am running on a ZyXel C1000Z

...router on the xbox needed reset.

Would you know how to create multiple accounts, so the kids don't play as me?

Hi there hoitoy,

Can you please clarify a little for us on the make/model of your router? Are you using a router or just the Zyxel C1000Z?

Also, Were you able to try any of the suggestions posted above?

• If so, were there any changes?

Also, have you made sure you are using the
latest firmware for your Zyxel device?

Please let us know and we'll go from there.

Just to be clear, when you disabled DHCP on the Belkin, did you then connect the Zyxel to a LAN port on the Belkin? Did you verify the IP you used for port forwarding on the Zyxel was the new IP the Xbox One got from the Zyxel, not the one it had from the
Belkin? If so, that should work unless something else is going on--can you get open NAT with the Xbox One directly wired to the Zyxel (with ports forwarded)? If not, that is a problem.

As far as settings for bridge mode, I'm not familiar with your ISP so I'm not sue which setting is best on the Zyxel. On the Belkin, you need to match the current ISP setting on the Zyxel--i.e. if Zyxel is using PPPoE, set the Belkin to that. You will probably
need to enter authentication (user/pass) depending on what that setting is...