Zyxel: Restore Factory Defaults

Zyxel (Modems/Gateways): Restore Factory Defaults
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: 1234

Restore Factory Defaults

From Hardware:

1. Locate the back of the device, where the Ethernet port are located.
2. Hold the reset button on the back for 30 seconds. You will need a paperclip, toothpick or pen to hold down the reset button.
   
3. Let go of the reset button and wait about 1 minute for the device to reboot.

From Firmware:

1. Connect a computer to the gateway with an Ethernet cable.
2. Open a web browser on a computer.
3. Type the gateway address: 192.168.1.1 into the web address bar, select
   apply.
4. This will take you to a login page, type admin for the username and type
   1234 for the password
5. Select Maintenance on the main page.
6. Select Tools.
7. Select the Configuration tab.
8. Select the Reset button.
9. Wait for the device to reboot, this may take a few minutes.

:)

 

Zyxel: Restore Factory Defaults

Zyxel (Modems/Gateways): Restore Factory Defaults
Zyxel P-650 Series

Login Information

Gateway - 192.168.1.1

Username - N/A

Password - 1234



Restore Factory Defaults

Through Hardware

1. Locate the Reset button.
2. Using the tip of a ballpoint pen or toothpick press and hold the reset button for 5 seconds or until the SYS led begins to blink.
   
3. Release the reset button.
4. Wait for the device to restart.

Through Firmware

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Locate the devices firmware at
   www.zyxel.com.
4. Download and save this file to your computer.
5. Log into the router by entering the default gateway,
   http://192.168.1.1 into the address bar of the internet browser.
6. The router will then prompt you to enter the username and password. There is no username and the default password is 1234.
   
7. From the menu on the left select maintenance.
8. From within the maintenance menu select Firmware.
9. Click the Reset button.
10. Wait for the device to reset and restart.

 

Zyxel: Restore Factory Defaults

Zyxel (Routers): Restore Factory Defaults
Login Information

• Gateway - 192.168.1.1
• Username - admin
• Password - 1234

Restoring Defaults

Through Hardware.

1. Locate the Reset button.
2. Using the tip of a ballpoint pen or toothpick press and hold the reset button for 5 seconds or until the SYS led begins to blink.
   
3. Release the reset button.
4. Wait for the device to restart.

Through Firmware

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway, 192.168.1.1 into the address bar of the internet browser.
   
4. The router will then prompt you to enter the username and password. The default username is admin and the default password is 1234.
   
5. Expand the Maintenance directory.
6. Select Tools from the submenu.
7. Select the Configuration tab from the top.
8. Click the Reset button.
9. Wait for the device to reset and restart.