Zyxel: Port Forwarding

Zyxel (Modems/Gateways): Port Forwarding
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: 1234

Port Forwarding

1. Open a web browser on a computer.
2. Type the gateway address: 192.168.1.1 into the web address bar, select
   apply.
3. This will take you to a login page, type admin for the username and type
   1234 for the password.
4. Select Network on the main page.
5. Select NAT.
6. Under the Port Forwarding tab you have options to add ports.
7. Under the Service Name select “User Define”. This will open Rule Setup where you can manually enter the port numbers and select the IP protocol.
   
8. Select Apply to save the changes.

Disable Port Forwarding

1. Open a web browser on a computer.
2. Type the gateway address: 192.168.1.1 into the web address bar, select
   apply.
3. This will take you to a login page, type admin for the username and type 1234 for the password.
   
4. Select Network on the main page.
5. Select NAT.
6. Under the Port Forwarding tab locate the active ports rules.
7. Select the small Trash Can icon under the “modify” category to remove the port rule.
   
8. Select Apply to save changes.

:)

 

Zyxel: Port Forwarding

Zyxel (Modems/Gateways): Port Forwarding
Login Information

• Gateway: 192.168.0.1
• Username: admin
• Password: (located on the bottom of the device)

Port Forwarding

1. Open a web browser on a computer.
2. Type the gateway address: 192.168.0.1 into the web address bar, select
   apply.
3. This will take you to a login page, type admin for the username and password (located on the bottom of the device).
   
4. Select Advanced Setup on the main page.
5. On the left hand side select Port Forwarding under the “Security Section”.
   
6. Select the device’s IP address in the dropdown next to “Select Device”. Alternatively you can
   manually enter in the IP address for the device.
7. Type in the Starting Port.
8. Type in the Ending Port.
9. Select Both in the “Protocol” drop down.
10. Select All IP Addresses for the “Remote Port and IP”.
11. Select Apply to save the changes.

Disable Port Forwarding

1. Open a web browser on a computer.
2. Type the gateway address: 192.168.0.1 into the web address bar, select
   apply.
3. This will take you to a login page, type admin for the username and password (located on the bottom of the device).
   
4. Select Advanced Setup on the main page.
5. On the left hand side select Port Forwarding under the “Security Section”.
   
6. At the very, bottom of the page select remove for the ports that were forwarded.
   
7. Select Apply to save changes.

 

Zyxel: Port Forwarding

Zyxel (Routers): Port Forwarding
Login Information

• Gateway - 192.168.1.1
• Username - admin
• Password - 1234

Port Forwarding

1. Open a web browser.
2. Log into the router by entering the default gateway, 192.168.1.1 into the address bar of the internet browser.
   
3. The router will then prompt you to enter the username and password. The default username is admin and the default password is 1234.
   
4. Expand the Network directory.
5. Select NAT from the submenu.
6. Select the Application tab from the top.
7. Check the box for Active
8. Enter a name such as XBL for the Service Name.
9. Input 3074 for the Local Port Range and Public Port Range.
10. Select TCP/UDP for the Protocol.
11. Enter the IP Address of the Xbox for the Server IP Address.
12. Click the Apply button.

Disable Port Forwarding

1. Open a web browser.
2. Log into the router by entering the default gateway, 192.168.1.1 into the address bar of the internet browser.
   
3. The router will then prompt you to enter the username and password. The default username is admin and the default password is 1234.
   
4. Expand the Network directory.
5. Select NAT from the submenu.
6. Select the Application tab from the top.
7. Uncheck the box for Active
8. Click the Apply button.