Zyxel: DMZ

Zyxel (Modems/Gateways): DMZ
Login Information

• Gateway: 192.168.1.1
• Username: admin
• Password: 1234

DMZ

1. Open a web browser on a computer.
2. Type the gateway address: 192.168.1.1 into the web address bar, select
   apply.
3. This will take you to a login page, type admin for the username and type
   1234 for the password.
4. Select Network on the main page.
5. Select NAT.
6. Select the DMZ Host tab.
7. Enter the IP address in the “default server” of the Xbox on your network.
   
8. Select Apply once you have finished to save changes.

Disable DMZ

1. Open a web browser on a computer.
2. Type the gateway address: 192.168.1.1 into the web address bar, select
   apply.
3. This will take you to a login page, type admin for the username and type
   1234 for the password.
4. Select Network on the main page.
5. Select NAT.
6. Select the DMZ Host tab.
7. Remove the IP address in the “default server” of the Xbox on your network.
   
8. Select Apply once you have finished to save changes.

:)

 

Zyxel: DMZ

Zyxel (Modems/Gateways): DMZ
Zyxel Q1000z



Login Information

Gateway - 192.168.0.1

Username - none

Password - none



DMZ

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
   
3. Click Advanced Setup from the menu at the top.
4. Locate the section labeled "Security".
5. Click on DMZ Host in that section.
6. Select the radio button next to enable.
7. Enter the IP address of the console where it says "Enter IP address" or select it from the Select Device drop down.
   
8. Click Apply.

Disable DMZ

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
   
3. Click Advanced Setup from the menu at the top.
4. Locate the section labeled "Security".
5. Click on DMZ Host in that section.
6. Select the radio button next to disable.
7. Click Apply.

 

Zyxel: DMZ

Zyxel (Modems/Gateways): DMZ
Zyxel P-650 Series

Login Information

Gateway - 192.168.1.1

Username - N/A

Password - 1234



DMZ

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway into the address bar of the internet browser. Example 192.168.1.1
   
4. The router will then prompt you to enter the username and password. There is no username and the default password is 1234.
   
5. After logging in to the utility, click on NAT under Advanced Setup.
6. Select "SUA Only" and click on Edit Details.
7. On the first line (Start Port and End Port should both say "All ports") input the IP Address of the Xbox.
   
8. Click Save on the bottom.

Disable DMZ

1. Plug the computer into a LAN port via an ethernet cable.
2. Open a web browser.
3. Log into the router by entering the default gateway into the address bar of the internet browser. Example 192.168.1.1
   
4. The router will then prompt you to enter the username and password. There is no username and the default password is 1234.
   
5. After logging in to the utility, click on NAT under Advanced Setup.
6. Select "SUA Only" and click on Edit Details.
7. Remove the Console’s IP Address from line one.
8. Click Save.