Zhone Zhone 6210: Overview

Zhone (Modems/Gateways) Zhone 6210: Overview
Device Name Zhone 6210

Login Information:

Default Gateway – 192.168.1.1

Username – Admin

Password – Admin



How to Find SSID (Network Name)

This device is not capable of wireless.



How To Find Wireless Passphrase (WPA/WEP)

This device is not capable of wireless.



Changing Wireless Security Type/ Disabling Wireless Security

This device is not capable of wireless.



MAC Filtering

This device is not capable of wireless.



Change Wireless Mode

This device is not capable of wireless.



Change Wireless Channel

This device is not capable of wireless.



DHCP Reservation

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the options across the top.
5. Select LAN Clients from the menu at the left.
6. Enter the desired IP Address in the Enter IP Address field.
7. Enter a host name if you desire.
8. Enter the MAC Address of your Xbox Console.
9. Click the Apply button at the bottom of the page.
10. Select Tools from the menu across the top.
11. Select System Commands from the menu at the left.
12. Click the Save All button to make the changes permanent.

UPnP

Only available on the 6211.



DMZ

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the options across the top.
5. Select Port Forwarding from the menu on the left.
6. Click the DMZ link to the right of the New IP button.
7. *At this point the manual is inconclusive. Most devices have a drop down menu or a space to enter the IP Address of the device you want to DMZ.*
   
8. Click Apply.
9. Select Tools from the menu across the top.
10. Select System Commands from the menu at the left.
11. Click the Save All button to make the changes permanent.

Disable DMZ

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the options across the top.
5. Select Port Forwarding from the menu on the left.
6. Click the DMZ link to the right of the New IP button.
7. *At this point the manual is inconclusive. Any drop down or space with an IP Address needs to be cleared or set to none.*
   
8. Click the Apply button.
9. Select Tools from the menu across the top.
10. Select System Commands from the menu at the left.
11. Click the Save All button to make the changes permanent.

Port Forwarding

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the options across the top.
5. Select Port Forwarding from the menu on the left.
6. Select the IP Address of your Xbox console from the LAN IP drop down.
7. Select User from the Category list.
8. Click the New button.
9. Enter 3074 in the port field.
10. Select Both from the protocol field.
11. Enter a description in the description field.
12. Click the Apply button.
13. Select Tools from the menu across the top.
14. Select System Commands from the menu at the left.
15. Click the Save All button to make the changes permanent.

Disable Port Forwarding

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Advanced from the options across the top.
5. Select Port Forwarding from the menu on the left.
6. Select the rule that was created earlier.
7. Click the Remove button.
8. Click the Apply button.
9. Select Tools from the menu across the top.
10. Select System Commands from the menu at the left.
11. Click the Save All button to make the changes permanent.

Firewall

*The firewall does not have any adjustable options.*



Restoring Factory Defaults

Through Firmware

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Tools from the menu at the top.
5. Select System Commands from the menu on the left.
6. Click the Restore Defaults button found at the bottom of the screen.

Through Hardware

1. Locate the reset button on the back of the device.
2. Press and hold the reset button for aprox. 5 seconds.
3. Release the button and wait for the device to restart.

How to Find Firmware Version

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.

Firmware Update

1. Locate the updated firmware file either from
   http://www.zhone.com/support/ or from your internet service provider.
2. Connect a LAN cable from your pc to the gateway.
3. Open a web browser and type http://192.168.1.1 .
   
4. Enter Admin for both the Username and Password.
5. Click the Login button found in the lower right corner of the screen.
6. Select Tools from the menu at the top.
7. Select Update Gateway from the menu on the left.
8. Click the Browse button.
9. Select the update file you obtained earlier.
10. Click the Update Gateway button.

Bridging Guide

1. Open a web browser and type http://192.168.1.1 .
   
2. Enter Admin for both the Username and Password.
3. Click the Login button found in the lower right corner of the screen.
4. Select Setup from the menu at the top.
5. Select New Connection from the menu on the left.
6. From the Type drop down menu select Bridge.
7. Set VPI to 0 and VCI 35.
8. Click the Apply button at the bottom of the screen.
9. Select Tools from the menu across the top.
10. Select System Commands from the menu at the left.
11. Click the Save All button to make the changes permanent.

Multiple Console Support

We have confirmed that this network device is unable to support more than one console with an Open NAT.



Known Issues

There are no known issues at this time.

Device Manual

Click
here for the manual.

:)

 

Zhone Zhone 6210: MAC Filtering

Zhone (Modems/Gateways) Zhone 6210: MAC Filtering
Device Name Zhone 6210

Login Information:

Default Gateway – 192.168.1.1

Username – Admin

Password – Admin



MAC Filtering

This device is not capable of wireless.

 

Zhone Zhone 6210: Known Issues

Zhone (Modems/Gateways) Zhone 6210: Known Issues
Device Name Zhone 6210

Login Information:

Default Gateway – 192.168.1.1

Username – Admin

Password – Admin



Known Issues

There are no known issues at this time.