xCloud Remote Play - On connect, switches Speaker Audio to Headset

This is the response "No option for Audio to be played on the speakers with the chat headset connected whilst leaving the chat microphone in use. No way to route the output audio to an external speaker system."

And that it may be included in the future.

So what part isnt working? Is the audio not coming out of the speakers or is the mic not working? I know some mics might need software to run properly so plugging them straight into an xbox wont work and as far as the speakers did you go into the xbox
settings and switch the audio output to speakers instead of headset? Also the best thing i have found for a streaming headset/mic combo has been a turtle beach elite pro 2 headset and this headset doesnt have to be connected into a controller, it plugs into
a mix amp which plugs into the xbox.

Troubleshoot settings

In-game audio issues when using Dolby Atmos:

If you experience audio problems when you’re using Dolby Atmos, try turning it off:

1. Press the Xbox button to open the guide and select System >
   Settings.
2. Select Display & sound, then from the headset audio options, select
   Stereo Uncompressed.

Frozen speaker settings after you disconnect a Windows Sonic or Dolby Atmos headset:

In most cases, disconnecting or turning off a headset/device configured for spatial audio (Windows Sonic or Dolby Atmos) will return the speakers to their previous audio settings. However, certain hardware—such as wireless headsets using an intelligent transceiver
plugged into USB—might still show the headset is connected even after it’s disconnected or turned off.

Unplug the headset or the headset component attached to the Xbox. This should immediately return the speakers to their previous configuration without changing the headset or speaker audio settings. Plugging the headset or the headset component back in should
restore the headset format you’ve chosen.

If you’re still having problems switching between speakers and headset on Xbox One, check the headset/speakers manufacturer’s website for more info.

Let us know with a reply how it goes!

Yeah, I tried all of that, nothing works. Switching between audio formats makes it glitch and waiting a second resets it but it still only works on stereo and 5.1 but the Atmos works FINE on movies, Dolby App etc. Atmos works, just not in games. Its clearly
an Xbox issue.

Troubleshoot settings

In-game audio issues when using Dolby Atmos:

If you experience audio problems when you’re using Dolby Atmos, try turning it off:

1. Press the Xbox button to open the guide and select System >
   Settings.
2. Select Display & sound, then from the headset audio options, select
   Stereo Uncompressed.

Frozen speaker settings after you disconnect a Windows Sonic or Dolby Atmos headset:

In most cases, disconnecting or turning off a headset/device configured for spatial audio (Windows Sonic or Dolby Atmos) will return the speakers to their previous audio settings. However, certain hardware—such as wireless headsets using an intelligent transceiver
plugged into USB—might still show the headset is connected even after it’s disconnected or turned off.

Unplug the headset or the headset component attached to the Xbox. This should immediately return the speakers to their previous configuration without changing the headset or speaker audio settings. Plugging the headset or the headset component back in should
restore the headset format you’ve chosen.

If you’re still having problems switching between speakers and headset on Xbox One, check the headset/speakers manufacturer’s website for more info.

Let us know with a reply how it goes!

This cannot be correct? how can it be a bug to only want to play audio through a headset and not through both headset and soundbar/speakers? you have always been able to choose the option to only play through a headset and turn off the output via speaker, since the September update you no longer can.

what possible use case would there be to play audio through both speaker and headset?