Xbox X saying not signal on the tv?

When you say 4K pass through, are you talking about a 4K source sending the TV signal to the Xbox and then to the TV? Or sending the Xbox1 X 4K signal to pass through a 4K receiver and then to the 4K TV?

Hi B. W, my name is Courtney and I would be happy to help.

I'm sorry to hear you're having trouble viewing your Xbox Series X on your TV. Here are some things you can try to fix the problem:

Check the HDMI connection: Make sure the HDMI cable is properly connected to the Xbox Series X and the TV. Check the HDMI cable or HDMI ports on your devices for visible damage.

Check TV input: Make sure your TV is set to the correct input for the HDMI port your Xbox Series X is connected to.

Restart Xbox Series X: Try restarting your Xbox Series X by holding down the power button for 10 seconds until it turns off, then unplug it and wait a few minutes before plugging it back in and turning it on.

Reset display settings: If there is a disc in the console, eject it.

On your console, press and hold the Xbox button for 10 seconds to turn it off.
Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep immediately and a second beep 10 seconds later. The power light will flash before the second beep. Don't let go until you hear the second beep or see the console boot into low resolution mode (the Xbox home screen will appear slightly pixelated).

Note: If you have an Xbox Series S or Xbox One S All-Digital Edition, you will need to press and hold the Xbox button and the Pair button, since your console does not have an eject button.

Search for updates:

Make sure you have the latest update installed for your Xbox Series X. Updates can sometimes fix display issues.

Information source (Credits): https://answers.microsoft.com/thread/2ca7b258-a7f9-48df-a092-4c10fa256389

I hope these suggestions help!

Best regards,
Courtney.

Hi Oskayra,

I've used the same cable. On multiple devices that would accept other devices but the Xbox one x.

A Nintendo switch is connected successfully with a cable to the tv. I've switched it to the Xbox one x but the tv doesn't recognize a signal.

Hi, Ray. My name is Ron, I'm an independent advisor. I will be more than happy to help you.

Please try the following steps one at a time to resolve the issue:

Confirm that both your TV and Xbox One console are turned on.

Check that your TV is set to the correct input signal (HDMI).

Check that the HDMI cable connections to your console and to your TV are secure.

Check that the HDMI cable is connected to the "out to TV" port on the console.

Try plugging the HDMI cable into a different HDMI port on your TV.

Try using a different HDMI cable to connect your console to your TV.

Try connecting your console to a different TV.

Power cycle your Xbox One: Press and hold the Xbox button  for 10 seconds to turn off the console, and then turn it on again.

This is seperate issue, xbox back up and running on different tv, however the tv tv that my xbox was plugged into at time of outage now will not recognise the xbox. Says no signal on that source