XBOX series x tv shows no input

I have tried all of that. There is a very weird issue. It works on monitors but not on any of my 4 TV's. I also brought it to a local tech center and they stated they never seen anything like this. They replaced the HDMI port and it is still not working. I am out of ideas on things to try.

Hello Wrightkathy,

Nilay here and I'm glad to answer your query today.

The first thing to check is the HDMI cable. Make sure it is properly connected to the Xbox and the TV. Another thing to try is switching the ends of the HDMI cable. For example, put the console's end of the HDMI cable into the TV and vice versa.

Check TV input: Make sure your TV is set to the correct input for the HDMI port your Xbox Series X is connected to.

Restart Xbox Series X: Try restarting your Xbox Series X by holding down the power button for 10 seconds until it turns off, then unplug it and wait a few minutes before plugging it back in and turning it on.

Reset display settings:
If there is a disc in the console, eject it.
On your console, press and hold the Xbox  button for 10 seconds to turn it off.
Press and hold the Xbox  button and the Eject button until you hear a beep to turn on the console. You will hear a beep immediately and a second beep 10 seconds later. The power light will flash before the second beep. Don't let go until you hear the second beep or see the console boot into low-resolution mode (the Xbox boot screen will appear slightly pixelated).
Note If you have an Xbox Series S or Xbox One S All-Digital Edition, you will need to press and hold both the Xbox  button and the Pair button as your console does not have an Eject button.

Check for updates: Make sure you have the latest update for your Xbox Series X installed. Updates can sometimes fix display issues.

Good Luck
Regards

I have had the same issue with Netflix and Apple TV (a few months), no Dolby Atmos, although there is a label Dolby Atmos at the title and chosen track with Dolby Atmos in the application. My AVR shows a PCM input signal for this application.

My setup is: Xbox Series X - Denon AVR X3700H - TV Samsung 75Q80T

Same issue since day one release. I have yet to get this to work with my Series X. I just shipped my Series X back today for GPU failure.

This feature still works fine with my Xbox One X Scorpio Edition.

Also on your Samsung TV, did your input change from the green Xbox to the blue generic "Game Console"? Mine did as if the TV does not recognize the device as an Xbox console. I can switch it out with my Xbox One X and the input icon changes back to the green Xbox.

Make sure you are using a HDMI 2.x cable. Try using another HDMI port on your TV. I have the 50" RU7100 and it works great.

Also check what mode your TV is in when connected to your Xbox. With your Xbox on, turn off TV, turn TV back on, check top right and it should show input and resolution.

Mine is 3840 x 2160 / 60p Input Signal Plus