Xbox Series X Controller(s) causing headset “Crackling” & Random Shut offs?

Here is a list of all the compatible headsets with the Series X: Which Xbox One accessories are compatible with Xbox Series X|S? | Xbox Support

i have a problem with my controller and turtle beach stealths 600’s series 2 disconnecting from my Xbox at random when I’m playing a game my audio starts getting all crackled and then lags and then disconnect from my Xbox.

The headset should work on an Xbox One controller and Xbox Series S/X controllers.

Turn off the controller by holding the Xbox button on the controller until the controller turns off and unplug the headset.

On your console press and hold the Xbox console button until the console turns off, remove the power cord from the console, and wait 1 minute.

Plug the power cord into your console again, turn on the console with your controller, and when you see your console's dashboard connect the headset to the controller and see if that solves the problem.

There isn't a router between my controller and console and I don't think neighbours' routers' would cause interference if that's what you're getting at since my router is closest anyway.

I'm really confused. I was using a Turtle beach audio controller with my headset. I unplugged that and plugged the headset directly to the controller and that seemed to lessen the popping. So does interference cause popping and crackling? When I move my
controller really far away from my console, my headset starts to crackle before disconnecting so you could be right.

Hello Payton L, My name is David. I am an independent advisor, happy to help you today.

If you're experiencing crackling, popping, or snapping sounds in your headsets when using your Xbox Series S, here are a few troubleshooting steps you can try:

1. Ensure that the headset is properly connected to the Xbox controller. Make sure the headset cable is securely plugged into the controller and that there are no loose connections.

2. Outdated controller firmware can sometimes cause audio issues. Connect your Xbox controller to your Xbox Series S using a USB cable and check for any available controller firmware updates. You can do this by navigating to the "Settings" menu, selecting "Devices & connections," and choosing "Accessories." Then, select your controller and look for any available firmware updates.

3. Try restarting your Xbox Series S to refresh the system and potentially resolve any temporary issues. Press and hold the Xbox button on your controller to open the power menu, then select "Restart console." After the console restarts, check if the audio issues persist.

4. Navigate to the Xbox Series S settings and make sure the audio settings are properly configured. Go to the "Settings" menu, select "General," then choose "Volume & audio output." Check the audio settings, including the volume levels, chat mixer, and spatial audio settings. You can try adjusting these settings to see if it improves the audio quality.

5. If possible, try using a different Xbox controller and see if the audio issues persist. This can help determine if the problem is specific to the controller or if it's a broader issue with the Xbox Series S.

6. Wireless interference can cause audio problems. Ensure that there are no wireless devices or other sources of interference near your Xbox Series S or the controller. Move away any devices that may be causing interference, such as routers, cordless phones, or other wireless devices.

If the reply was helpful, please don’t forget to upvote or accept as an answer, thank you.
Best regards.