Xbox Series S LB Button constantly pressed as XBOX button

Hello QUIRKOKASEE, this is Manuela. I'm an Independent Advisor and community user like you, ready to assist with this.

Not a Microsoft employee.

I’m sorry to hear you’re having some trouble when trying to use your controller on your Series S. Let’s try to sort this out.

Based on the information you provided, I can suggest these possible solutions:

A. Downgrade your controller firmware, you can follow the steps by clicking one link or another:

https://answers.microsoft.com/en-us/xbox/forum/...

https://support.xbox.com/help/hardware-network/...

B. If you have another controller close to you. Try connecting it temporarily to your console to verify if the same behavior occurs.

C. Perform a physical power cycle by disconnecting the power cable

“Turn off your console by pressing the Xbox button on the front of the console for about 10 seconds, until it shuts down completely.
Unplug the console's power cable. Wait 10 seconds.

Important, Be sure to wait at least 10 seconds. This step resets the power supply.

Plug the console power cable back in.
Press the Xbox button on your console to turn it on.”

You can find the same steps in the article below
https://support.xbox.com/help/hardware-network/...

If you have an Xbox Series S, press and hold the Xbox button  and the Pair button  instead, as your console doesn’t have an Eject button.

The problem with my LB button working as RB button is on my Xbox series x controller

Since you are using an Xbox Series S console, please press and hold the Xbox button and the Pair button instead when resetting the display settings.

Press the Xbox button and press RB or LB until you’re at the icon with the two people on it