XBox One X console beeps loudly

Hello Ninja,

Thanks for reaching out to the forums. We understand you have an issue with your console. Does this do it on all multiplayer games? Does it do it in campaign mode? If it is only that game, we recommend to reinstall the game. Please provide as much information
as possible so we can assist you further.

Thanks,

Brad

Does it do it in campaign mode? If it is only that game, we recommend to reinstall the game.

Thanks for the reply.

It does it in campaign mode, muiltiplayer menu and game, co-op menu and game, and even the games store.

I have tried a couple other games and apps and havent had the issue.

My XBox was factory reset when i sent it in for service, spent the day downloading everything again and still has the same issue.

Hey there!

Thank you for reaching out to us on the Forums regarding your Xbox One X. Now when you are saying it's making a loud beep sound, Is this coming from your TV's audio or do you hear the beep coming from your Console as you would with the power up tone?

If you have not tried this yet, Go ahead and
Physically Power Cycle your Xbox One and then give it another try and see if you still hear the beep.

Please let us know if this has helped.

Hello Renita02! I'm Claus, an Independent Microsoft Community Consultant for Xbox! Glad to be able to help you!

Making sure that your TV has the correct Source selected (the same HDMI input on your TV that the Xbox One is connected to), and also that the HDMI cable is connected to the HDMI Out port on the back of the Xbox One, follow these steps:

1. If there's a disc in the Xbox console, eject it (only applies to Xbox One (S and X) and Series X).

2. On the console, press and hold the Xbox button for 10 seconds to turn off the console.

3. Press and hold the Xbox button and the Eject* button (check the note below if your console doesn't have the Eject button) until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later.

The power light will flash on before the second beep. Don’t let go from Power and Eject* ( or Pair, depending on your console) until the second beep occurs.

*Note: If you have an Xbox One S All-Digital Edition or Xbox Series S, you’ll need to press and hold the Xbox button and the Pair button instead, as your console does not have an Eject button.

4. This will boot your console in low resolution mode (640 × 480). To reset this setting, press the Xbox button to open the guide. Select Profile & system, then Settings.

You should be able to start your Xbox One in low resolution doing this.

Hello Its_Snoopy! I'm Claus, an Independent Microsoft Community Consultant for Xbox! Glad to be able to help you!

If your console is an Xbox One or Series X|S, let's try a few things. Follow these steps:

1. Unplug your console from the wall for 30 seconds.

2. Connect it to wall again.

3. Turn it on.

5. Check if the issue has been resolved.

If that didn't work, check that your console's cables are all connected correctly, like the HDMI cable is connected to the HDMI Out port on your console. Then, follow these steps:

1. If there's a disc in the Xbox console, eject it (only applies to Xbox One (S and X) and Series X).

2. Make sure the console is off.

3. Press and hold the Xbox button and the Eject* button (check the note below if your console doesn't have the Eject button) until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later.

The power light will flash on before the second beep. Don’t let go from Power and Eject* ( or Pair, depending on your console) until the second beep occurs.

*Note: If you have an Xbox One S All-Digital Edition or Xbox Series S, you’ll need to press and hold the Xbox button and the Pair button instead, as your console does not have an Eject button.

4. This should boot your console in low resolution mode (640 × 480). To reset this setting, press the Xbox button to open the guide. Select Profile & system, then Settings.