Xbox One S is changing the TV port

There is a setting for selecting source on the xbox. Under start up behaviour and also control AV/TV that can cause this.

I had it when I set the xbox to be able to control the TV with the xbox remote/IR thing.

I just turned off the auto switch to TV setting, and the ability to control AV equipment and it stopped happening.

Hi, Praveen my name is Oskayra, and will be a pleasure help you

It's understandable that you're facing this issue with your Xbox One S console not displaying a signal on the TV in Japan. Here are some troubleshooting steps you can try to resolve the issue:

Check the HDMI cable connection: Ensure the HDMI cable is firmly connected to both the Xbox One S and the TV. Disconnect and reconnect both ends of the cable to ensure a secure connection.

Try a different HDMI cable: If possible, try using a different HDMI cable to rule out any issues with the original cable.

Change HDMI input on the TV: Check the TV's input settings and ensure that you are on the correct HDMI input port connected to the Xbox One S.

Power cycle the Xbox One S: Turn off the Xbox One S completely by holding the power button for about 10 seconds until the console shuts down. Unplug the power cord for 30 seconds, and then plug it back in and turn on the console.

Update the Xbox One S software: Ensure that the Xbox One S is running the latest software updates. Go to Settings > System > Updates and check for any available updates.

Try different HDMI ports on the TV: If your TV has multiple HDMI ports, try connecting the Xbox One S to a different HDMI port.

Check for TV compatibility issues: Check if your TV is compatible with the resolution and refresh rate settings of the Xbox One S. You can adjust these settings in the Xbox One S's video settings.

Try a different TV: If possible, try connecting the Xbox One S to a different TV to rule out any issues with your current TV.

I hope this helps! Don't hesitate to ask if you have any further questions or need additional clarification.

Hi buddy..

This happen to my XBox 360 S too.

Check the TV HDMI ports. One of the port maybe no good.

Maybe try another TV in another room just to see if its the HDMI ports.

Make sure the HDMI port are on in the TV menu (sometimes its set off)

Try this hopw it works

• Make sure your HDMI cable is plugged into the correct port on your TV. Some 4K TVs only support their full set of 4K features on specific HDMI ports. See your TV manual to determine if there are special 4K HDMI ports, or try different ports on your TV.
• Check your TV's settings menu. Your TV might have a special mode that controls your TV's refresh rates. See your TV manual to determine if you need to change your TV's settings.
• Make sure you're using the HDMI cable that was included with the Xbox One X and Xbox One S.
• Try a different HDMI cable. Your cables must be HDMI High Speed or HDMI Premium certified.
• Plug your TV straight into your console with the HDMI cable that was included with the Xbox One X and Xbox One S. Some AV receivers or other video equipment may not correctly pass the signal to your TV or console. Also, you'll need to use HDMI High Speed
  or HDMI Premium certified cables between both the console and receiver, and the receiver and TV.

Some TV will have the res on the HDMI port. I only have one 2.0 port on my 4kTV. Just only one. Other is older version of the HDMI port. And my XBOX ONE I have now is on it.. But it not the S.