Xbox one original first edition

I know there has been many advances with the xbox consoles. Sadly, it took me many years to understand the HDMI out to TV. My problems were a loose connection when I plug in to both HDMI. I scratch my head and buy cables with the same issue. Possibilities
would be loose male connectors on the board of the xbox. I took it a part and saw that the HDMI male connectors were stable and secured on the board. I put it all together with no change. I constantly have to adjust the connection over the years and i took
it a part again to get a more in depth look. The plastic identifier that shows your connection ports, I carefully removed it and plugged in the HDMI cord to reveal that it locks into place with no play. I put on the identifier to find out that I have movement
on the connection like its loose again.

This results in a design flaw of the plastic identifier, or panel being to thick and not allowing the HDMI cord to be seated all the way in, and not reaching the 2 holes in the male connector of the HDMI cord to the 2 notches in the HDMI ports of the xbox.

Solution to this is problem is to trim almost a wooden toothpick thick of rubber on one of male connectors of the HDMI cable carefully to give you a little extra connection, and allows the HDMI to be secured with no play.

:)