xbox not playing to tvscreen

Hello Ranger,

One of the steps provided within the troubleshooting a blank TV screen or monitor while your Xbox One is on
support article, one of the steps that troubleshoots the console directly from using the buttons that are physically on there is the following:

1. If there's a disc in the Xbox One console, eject it.
2. On the console, press and hold the Xbox button
   for five seconds to turn off the console.
3. Press and hold the Xbox button
   and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.
   Note This will boot your console in low resolution mode (640 × 480). To reset this setting, go to
   System > Settings in the guide, select
   Display & sounds, Video options, and then TV Resolution.
   

If this has been attempted, and picture is still not shown, the console may need to undergo repair as there would be a concern involving the HDMI port on the console. Can you check the port itself for damage or debris?

Try this and let us know the results.

Best wishes!

Try a different HDMI port or cable one at a time.

Hello, we sorry to hear about the issue and any frustrations this may have caused. Considering what you told us, we recomend you to, check the following link to find out more information about this issue and a possible solution...



https://support.xbox.com/en-US/xbox-one/console/tv-or-monitor-screen-is-blank-while-connected

Let us know if these sugestions fix your issue, or if you need more assistance?

Hi sorry to hear this being an issue.

Id check out troubleshooting steps here...

https://support.xbox.com/en-US/xbox-one/console/tv-or-monitor-screen-is-blank-while-connected

Have you tried the console on a different tv and different connections?