Xbox Menue (Shutdown and Energysave) in English, normal?

I thought about that for a bit, but does not make sense.

- it's on EnergySaver you shut down more, and there is the problem

- instant on would be standby and that works fine.

EnergySaver or standby would be the same, think they both check for updates. I think I read somewhere..

No mode allow for complete shutdown, but on Sleepmode setting page "full shutdown" and that works to.

I think can be fixed with software update the more I think about it.

I would like option to completely shutdown from X-button menu. That would be grand. A setting to assign which shutdown you want to X-button or similar.

I do all updates manually anyway.

Hey, it seems to be working now. After restarting multiple times. No everything always works normally. Thanks for the reply. One thing i noticed is when you change xbox settings to do full shutdown or quick shutdown the shutdown or restart buttons dont work in that menu. Everything else seems fine.

You mentioned that your Xbox was on Instant on. Could you try and change it to Energysaving and then perform a

powercycle

Ok, i've found out what was the problem.

If you "Turn Off" your Xbox by Pressing Xbox Button and take it afterwards from your power supply, the Disc-Bug will affect the Console with the next Start.

To avoid this, you have to shutdown the Xbox from Power Settings and chose "Full Shutdown".

I never realised before that "Turn Off" is not the same as "Full Shutdown".

Maybe it would be a great enhancement, if "Full Shutdown" becomes avaiable on the Xbox Quick Menu.

Thanks for the reply.

In effect i think it's normal the controller blinks some times after a full shutdown but in my case when the described issue occurs the controller continues to blink during about 2 or 3 minutes after shutdown and i do not think it's normal.

But the main trouble is the random reboot or random full shutdown when i put xbox in sleep mode. This should not happen because the instant start-up is selected in the settings...