Xbox elite series 2 input delay for different connections

Hello!

Hope you are well. I'll be glad to assist you.

I'm sorry you're experiencing these issues.

If the problem persists even after updating, please try the following process.

1. Press and hold the Power button on the front of your Xbox until the console turns off.

2. Unplug the power cord from the back of your Xbox.

3. Wait a minute, and then plug the power cord back in.

4. Press the Power button on your Xbox to turn it back on.

5. Pair your controller and console again and check if the problem persists.

If so, is the issue specific to this controller, or have you noticed the regular controller behaving the same way?

Have you tried connecting the Elite controller to another device to see how it behaves?

I will be attentive to your response.

Best regards.

Hi PsycoPyro88,

Thanks for the reply. The Elite controller series 2 has various methods of mapping the buttons and paddles as compared to the series 1. If you haven't done so already, I recommend taking a look at the following support articles that
can assist you in determining how to set up the different functions, including how to use Shift with the controller to give you alternate inputs:

Get to know your Xbox Elite Wireless Controller Series 2


Use the Xbox Accessories app to customize your Xbox Elite Wireless Controller Series 2  


Use Shift with your Xbox Elite Wireless Controller Series 2

Adjust the thumbsticks on your Xbox Elite Wireless Controller Series 2


Charge your Xbox Elite Wireless Controller Series 2


If you'd like to contribute some ideas on how to make improvements to or about other ideas for the community, you may do so at the Xbox Idea Hub which is on Reddit.

https://www.reddit.com/r/xboxinsiders/wiki/ideas

I hope that this information helps you out!

Updated:

I found that my soundbar SONY HT Z9F soundbar use HDMI 2.0 of which bandwidth is 18gbs connect to my TV using eARC port, so I changes my HDMI to

8K HDMI of which soundbar is 48gbs, and the delay improve a lot that it is hard to notice now.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------

I have tested. My set is

TV has enable eARC and set sound passthrough, HDMI BITSTREAM. XBOX SERIES allows PASSTHROUGH.

XBOX SERIES X --> LG 65 QNED90 --> SONY HT Z9F (eARC)

there is very noticeable delay on Atmos but don't have delay on any uncompressed sound like 5.1 or 7.1

XBOX SERIES X --> SONY HT Z9F (eARC) --> LG 65 QNED90

the atoms sound is sync with image, but I got a ton of delay on controller input, so I set TV image mode to Game Optimize,

and set game mode to FPS, the controller input delay is gone, but now, i got atoms delay back...

By the way, because my TV doesn't support DTS - X PASSTHROUGH, so when I connect XBOX to my soundbar, I could enable DTS X, and DTS X is working perfectly and there is no any delay comparing to Dolby Atmos.

Razer Blade 15 with RTX 2070 MAX Q --> LG 65 QNED90 --> SONY HT Z9F (eARC)

I don't have any input or atmos sound delay in this set.

So here is conclusion:

xbox series x has issue to passthrough Atmos content, even thought it is directly connect to sound bar, the sound or TV try to delay image to sync with atmos sound which causes a ton of input delay. But once you set the TV into low legacy input mode to get rid of input delay, the Atmos sound delay will be back.

And Razer blade 15 with RTX 2070 MAX Q which is PC is perfectly working at Atmos without any issue.

So this is definitely XBOX SERIES X ISSUE!!!!

I'm Samy an independent advisor. Welcome to the community. How are you?

This controller does not support xCloud. These are the controllers you can use.

Official Xbox controllers

Xbox Wireless Controller (Bluetooth or USB connection)

Xbox Elite Wireless Controller Series 1 (USB connection only)

Xbox Elite Wireless Controller Series 2 (Bluetooth or USB connection)

Xbox Adaptive Controller (Bluetooth or USB connection)

Did you find a solution to this problem? I updated my Elite series 2 yesterday, and now I have the exact same problem. Elite series 2 is recognized as a regular xbox controller and does connect via bluetooth, but doesnt work. Connected via USB-c the XBOX accessories app doesnt even recognize it...

Tried uninstalling and reinstalling the app, but that didnt help.