xbox display

Hi, if you connect the xbox to the tv that is does show a display on, then go to settings/console settings/display and disable display discovery. Then connect the xbox to the tv you are getting no display on do you then get a display at all ?

Try the same cable and Xbox 360, on another display. Try another cable, with the same Xbox 360 and display.

This will help determine if it's the cable, display, or Xbox 360 at fault.

Hello @Pzrozaye22, I hope everything is going well!

Thank you for reaching Microsoft Xbox Forum support!

Please check the following points:

• Confirm that both your TV and console are turned on.
  
• Check that your TV is set to the correct input signal (HDMI).
  
• Check that the HDMI cable connections to your console and to your TV are secure.
  
• Check that the HDMI cable is connected to the "out to TV" port on the console.
  
• Try plugging the HDMI cable into a different HDMI port on your TV.
  
• Try using a different HDMI cable to connect your console to your TV.
  
• Try connecting your console to a different TV.
  
• Power cycle your console: Press and hold the Xbox button  for 10 seconds to turn off the console, and then turn it on again.
  

If the issue persists, try resetting your display settings:

1. If there's a disc in the console, eject it.
   
2. On the console, press and hold the Xbox button for 10 seconds to turn off the console.
   
3. Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. Don’t let go until you hear the second beep or see the console start up in low resolution mode (the Xbox startup screen will appear slightly pixelated).
   
   • Note If you have an Xbox Series S or Xbox One S All-Digital Edition, you’ll need to press and hold the Xbox button and the Pair button instead, as your console does not have an Eject button.
     
4. In either case, this will start up your console in low resolution mode (640 × 480). To change this setting, press the Xbox button to open the guide. Go to Profile & system > Settings > General > TV & display options, and then select the resolution you want from the Display dropdown.
   
5. If you’re required to complete these steps on every startup, you’ll want to change your TV connection to HDMI as shown in step 3 of the next section, "Your screen is blank and you use an AVR in your setup." For more info, see How to adjust the display settings on your Xbox.
   

I wish you a lovely day, and I hope this helps you out!

Kind Regards

Stay safe, and happy gaming!

So one console but split each connected person to their own screen? Not possible.... but a lot of multplayer games you can do split screen.

Hi,

Can you please tell us what monitor you have?

Thanks