Xbox 360 wireless controller please the step for w8.1

Hello Grondis,

Thank you for bringing this issue to our attention. The Xbox 360 wireless controller requires a gaming receiver in order to connect to a computer. The article entitled

Xbox 360 Wireless Gaming Receiver for Windows 10 contains steps on how to set up the controller on a Windows 10, Windows 8 and Windows 7 computer. Be sure to let us know the results!

Hello, I hope you are well.

Please check these steps below.

What you are seeing with the LEDs is an indication that the Xbox 360 Explorer controller is entering pairing mode, not working mode. In order for the controller to function on your PC, you must first pair it with the Xbox 360 Wireless Adapter.

Steps to pair the controller with the wireless adapter:

Connect the wireless adapter: Connect the Xbox 360 Wireless Adapter to a USB port on your PC.

Press the pairing button on the adapter: On the wireless adapter, there is a small button (usually near the USB port). Press and hold this button for a few seconds. The LED on the adapter should start blinking.

Turn on the controller: Press the Xbox button in the center of the controller to turn it on.

this:www.microsoft.com/.../type-cover

+

this:gaming.logitech.com/.../g602-wireless-gaming-mouse

+

miracast on W8.1

-----------------------------

kbm on XB1

.

now please stop asking and just use the best damn controller for any console ever. minus the power glove, obviously.

Hi there,

I don't really understand the issue you are having. Do you have issues connecting your controller to the Xbox 360 console?
If so please see this troubleshooting page for some steps to try:

https://support.xbox.com/help/xbox-360/accessories/xbox-360-wireless-controller-cannot-connect



If there is a different issue please provide some more information about the problem you are experiencing.

Hey there octi62!

I'm sorry to hear about the controller issues. It's possible that this issue could be caused wireless interference from a router, cordless phone or another wireless device. Just to make sure that we have not missed any troubleshooting steps, I would like you
to try a few steps.

Please give the following steps a shot:

• Disconnect your wireless controllers by removing the battery pack.
• Turn your console off, wait 5 minutes and then turn it on again.
• Replace the battery pack on your wireless controller.
• Make sure that there are no objects placed between your console and controller.
  
• Try to sync a wireless controller to your console.

If this issue continues, please let us know and we will be standing by to help. You can also view some additional troubleshooting steps on our Xbox
360 Wireless Controller disconnects page.