Xbox 360 can't connect to Spectrum Wifi.

Hello, first it's a pleasure to be able to help you today.

My name is welcome to the community.

Hello Talion1678, try to check that, in your new modem/router settings the two wi-fi frequencies are active, at 2.4 & 5.0 Ghz, after that, on the frequencies they are arranged by channel.

By definition they come in automatic but can be configured and tested, this can make xbox recognize the network better.

I don't know what your modem settings look like, but they usually appear as in the image below.

Hello Talion1678,

I'm more than happy to help with your problem. To find your router's settings page, you need to type in the router's IP address into your browser's address bar (not the search engine). Common router IP address' are 192.168.1.1 | 192.168.1.254 | 192.168.0.1

These are spaced out by [|]. Try each one, if none of them work, look for it on your router's manual. If it's not there either, go to a Windows PC on the same network and follow these steps

1. Click on the Start menu.

2. Type in cmd into the search box.

3. Press Enter.

4. Type in ipconfig into the Command Prompt window that appears.

5. Find your Wi-Fi or Ethernet adapter's name, it will be labelled "Ethernet adapter Ethernet" or "Wireless LAN adapter WiFi" depending on what type of Internet connection you're using. Look beside 'Default Gateway' (see image below). Make sure it's the IPv4 address (the one with just numbers and full stops), not the IPv6 one (with symbols and letters).

Hope this helps!

How would find this settings page? I've looked everywhere I can think of.

Hello again, to get to these settings will have to have access to the administration page of your modem / router, this is usually done by the browser of your PC, but will have to do with your Internet service provider the internal IP of the equipment and login and password to access.

This page I put up is just one example of what the modem/router administration page can be like.

Hi Ricky McMe,



We haven't heard from you for 72 hours, so we assume the issue has already been resolved. We will not monitor this thread going forward, so if you need further assistance, click this link to create a new thread to discuss these issues. Create a new question or start a discussion (microsoft.com)








Thank you for your understanding.



Kind regards,



Moderator

Microsoft Community