Wireless Xbox one gamepad won't pair with xbox wireless adapter.

Hi MasumArvas,

Thanks for reaching out to us in the forums for this issue. Based on what you've stated, it is possible that your wireless Xbox One controller may require an update to its firmware. This is a common issue most times when the controller is unable to bind
to the wireless adapter or connect via USB cable.

Here are some great support articles that you can use to troubleshoot the issue between your controller, the wireless adapter and your PC:

• How to update your Xbox One Controller on Windows 10
• Troubleshoot the Xbox Wireless Adapter for Windows
• Connect and troubleshoot Bluetooth on your Xbox One Wireless Controller
  
• Xbox One Wireless Controller Solution-Troubleshoot your Xbox One wireless controller

Have a look at the troubleshooting articles and give the solutions a try, then let us know the results.

I hope that this helps you out!

I solved the problem. I tried another USB c cable to pair the gamepad itself.

You can try a PC adapter for wireless use of the Xbox gamepad.

Hello, I hope you are well.

Please check these steps below.

What you are seeing with the LEDs is an indication that the Xbox 360 Explorer controller is entering pairing mode, not working mode. In order for the controller to function on your PC, you must first pair it with the Xbox 360 Wireless Adapter.

Steps to pair the controller with the wireless adapter:

Connect the wireless adapter: Connect the Xbox 360 Wireless Adapter to a USB port on your PC.

Press the pairing button on the adapter: On the wireless adapter, there is a small button (usually near the USB port). Press and hold this button for a few seconds. The LED on the adapter should start blinking.

Turn on the controller: Press the Xbox button in the center of the controller to turn it on.

Yes, you can use the Xbox One wireless headset chat mixer on PC if you have the USB wireless adapter.

To do this, you will need to follow these steps:

1. Connect the USB wireless adapter to your PC.
   
2. Turn on your Xbox One wireless headset and hold down the power button on the headset until it starts flashing. This puts the headset in pairing mode.
   
3. Press the pairing button on the USB wireless adapter until the LED starts flashing.
   
4. Once the LED on the USB wireless adapter stops flashing and stays lit, the headset is paired with your PC.
   
5. Open the Xbox Accessories app on your PC, and click on the "Xbox One Wireless Controller" device.
   
6. From there, you can adjust the chat mixer settings to your liking.
   

Once you have completed these steps, you should be able to use the chat mixer on your Xbox One wireless headset with your PC.