Wireless Repeaters/Range Extenders: cant get ip address

if ur using a repeater / extender, try manually putting ur IP all that

May I ask, are you able to bypass your wireless extender and connect your console directly into the router? If not, try restore your extender to factory defaults and manually configure your extender's wireless settings. For this, consult the manual for your
wireless extender, or
read the following guide.

I would also suggest that you visit Linksys website, to make sure your wireless extender is up-to-date with the latest version of firmware.

.Two valuable tips:

1. Make sure you use different wireless channels for your router, resp. wireless extender. Use channels that are non-overlapping with each other (1, 6, 11).
   
2. Use a
   static IP address for your wireless extender, instead of letting the router assign IP address to your extender.
   

If you choose to use static IP, I would advice you to alter the DHCP's IP pool end- or start -address, depending on your router's configuration. This method is used to avoid IP conflicts with devices that obtain IP configuration from the DHCP server's dynamic
range.

For example, if your default gateway uses 192.168.1.1 and the DHCP IP address pool ranges from 192.168.1.2 - 192.168.1.254 (LAN), lower the ending address to be 192.168.1.100 and make your extender's IP to be outside of the dynamic range. For example, 192.168.1.120

Is the ban over. If so there is not really anything that could be done. If it is still in effect you could make a case review telling the, what you just said. To submit a case review please go to https://enforcement.xbox.com/

That'll do, Pig. =) Thanks for trying that.

The issue sounds like it's coming from the two routers communicating with each other, and then to your console. You may want to look into a

wireless repeater/range extender to boost your signal instead of using a second router. This will ensure that the secondary device is only extending the wireless signal to your console and not complicating it.

Hello,

If you want to join the preview program you need to sign up via the insider app.

A nice step by step process can be found here.

https://news.xbox.com/en-us/2017/11/06/learn-enroll-xbox-one-x-xbox-one-update-preview/

However are you looking just to be able to cast your Xbox to your PC? That can be done via the WIndows 10 Xbox App! Which you can just grab from the App store.

Zero.