Wi-Fi detection ishue on Xbox One, after restarting console

After you connect both consoles with the wi-fi adapter, you need to turn on ad-hoc on both consoles for it to be able to detect each other

Qual Xbox você está tentando obter Wi-Fi em? Como o Wi-Fi deve detectar sua rede, então você só tem que adicionar sua senha roteadores para o console

[Translate]

Which Xbox are you trying to get Wi-Fi on? As Wi-Fi should detect your network, then you just have to add your routers password to the console

Will the Xbox One console automaticly detect my Wi-Fi Wireless Router Modem on first time out of the box first time console set up???

Hello BlackSmithHammer! I'm Claus, an Independent Microsoft Community Consultant for Xbox! Glad to be able to help you!

It could be that the latest update introduced a small bug on the console's Wi-Fi. Let's check if by doing some simple procedures, you might get your console connected to the internet again.

Follow these steps:

1. With the console on, press and hold the Xbox button on the console itself until it shuts off.

2. Unplug it from the wall for 30 seconds.

3. Connect it to wall again.

4. Turn it on.

5. Check if the issue has been resolved.

If your console still can't detect your Wi-Fi extender, check if you can change the Wireless channel to channels between 5-10, because it could be that your console isn't detecting your Wi-Fi given that it is on a unsupported channel (this has happened to me before on a different console).

And if after trying all of those steps you still can't get your console connected to your Wi-Fi, then it would be recommended to contact the Xbox Support, to report this bug.

Hello, Araiz K. I'm Arturo, a community user like you, and I'll be glad to provide assistance with your inquiry today.

That's correct; according to Microsoft, the Xbox 360 E has a built-in Wi-Fi module, so you don't need to purchase the wireless adapter.

https://support.xbox.com/help/xbox-360/networking/configure-wireless-settings
“The Xbox 360 E console has built-in Wi-Fi. If you have a wireless network, you don’t need anything else.”

However, there is a chance that your console Wi-Fi module is faulty and, for this reason, is not being detected by the system. Therefore, I would like to ask if restarting or factory resetting your console has the same outcome.

I'll look forward to hearing from you.

Regards,

Arturo.