Why won’t my Xbox display on my tv?

I have the same problem - have you resolved yours. I have tried all of the above and no success.

Hello. I'm Arturo, and I'll be glad to provide assistance with your inquiry today.

I'm sorry to hear that your Xbox console is not showing up video signal on your TV.

Not only that, but I would like to ask if you tried:

A. Start your Xbox in the low resolution mode.

“If there's a disc in the console, eject it.
On the console, press and hold the Power button on the front of the console for 10 seconds to turn off the console.

Press and hold the Power button and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep.

Don’t let go until you hear the second beep or see the console start up in low resolution mode (the Xbox startup screen will appear slightly pixelated).

Note: If you have an Xbox Series S or Xbox One S All-Digital Edition, press and hold the Xbox button and the Pair button instead, as your console doesn’t have an Eject button.

In either case, this will start up your console in low resolution mode (640 × 480).”

After doing this procedure, you can change the resolution again.

Reference link:
https://support.xbox.com/help/hardw...tv-or-monitor-screen-is-blank-while-connected > Your screen is blank after you turn on your console > reset your display settings.

B. Connect your console to another HDMI port on your TV.

C. Connect your console to another TV in your house.

I'll look forward to hearing from you.

Kind regards,

Arturo.

Hi, viaEyeso! Kindly try to see if you can pull up the Xbox troubleshooter page. Press and hold the Bind button and the Eject button, then press the Power Button. Bind is located on the left side and the Eject button is next to the disc drive on the front of the console.

Hold the Bind and Eject buttons for between 10 and 15 seconds, or until you hear the system power-up sound twice in a row. The process has failed if you do not hear the power-up sound or if you hear the power-down sound.

I appreciate you trying the steps. If it still persists I am afraid your console needs to be repaired. If it’s still in warranty, you can submit the request by following this link: https://support.xbox.com/en-US/help/hardware-ne....

If you’re located in the United States, you can also find a participating Best Buy service centre for in-person support.

I tried this and it still didn’t pop up.