Why is my xbox acting like this? (Look at details)

Yeah that was the next thing we were gonna do. Thank you for trying though I appreciate the help from anyone.

Thanks for trying. As much as I want to fix that, I am afraid that you're gonna need to send it for repair since we've already exhausted all the steps to make it work.

You may check your repair options here https://support.xbox.com/help/hardware-network/...

Hi milk!

Sorry to hear about the issue. Just want to make sure if you have checked all the solutions from this link here https://support.xbox.com/help/hardware-network/... ?

If your HDMI cable and other connections are all correct, then the issue is on your console.

Check to see if you can bring up the Xbox Startup Troubleshooter:

1. Power off your console, and then unplug the mains lead to ensure that the console is completely powered off.
2. Wait 30 seconds, and then plug the mains lead back in.
3. Press and hold the Pair button and the Eject button on the console, and then press the Xbox button on the console.

Note The Xbox Series S and the Xbox One S All-Digital Edition do not have Eject buttons. You can bring up the Xbox Startup Troubleshooter on this console by holding only the Pair button (steps 3 and 4) and then pressing the Xbox button.

4. Continue holding the Pair and Eject buttons for 10-15 seconds.
5. Listen for two “power-up” tones a couple of seconds apart. You can release the Pair and Eject buttons after the second power-up tone.
6. The console should power up and take you directly to the Xbox Start-up Trouble-shooter.

Once you're able to see it, there's an option to reset your Xbox on the screen.

Thanks for the reply! I followed your steps and my console won't make the second startup noise even if I'm holding the buttons for over 30 seconds.

That's very kind of you. I appreciate it. Thanks too for your patience and time here in our community.

Take care!