Why do I get disconnected from Xbox parties on PC.

Hello!

My name is Dérek, I'm an independent platform consultant and I'm grateful for the opportunity to help you.

Just from the nat being open, clearly you still have some kind of restriction where you are letting your network oscillate. When this occurs, you are disconnected.

Perform these 2 processes below, and if the error remains, you need to configure your network.

Let's try this IP and cache cleanup, please

Type CMD in the search bar;

Right-click on the Command Prompt option;

Click on the Run as Administrator option;

From the Command Prompt screen, execute the commands described below, pressing Enter at the end of each line:

ipconfig /release <Enter>

ipconfig /renew <Enter>

ipconfig /flushdns <Enter>

ipconfig /registerdns <Enter>

nbtstat -rr <Enter>

netsh int ip reset all <Enter>

netsh winsock reset <Enter>

These commands are for resetting IP configuration and network-related caches that may be stored on your computer.

1.On the desktop, press the Windows + R keys simultaneously to open Run;

2. At run type cleanmgr and click OK to open Disk Cleanup;

3. In the Disk Cleanup window, select the C: drive (if asked) and click OK;

4. In the Disk Cleanup for Windows 10 window, select the checkboxes for the files shown and click Cleanup System Files.

5. After cleaning, check the checkboxes that are not checked again and click OK>Delete Files.

This is the configuration:

They are unconfigured, so have access restrictions, causing these errors.

If you do not have knowledge, I advise you to contact the ISP that they will do for you

set a fixed ip for the console/PC, open the ports described below, disable and enable the UPnP function and disable the modem firewall, if you have a modem and a router the process has to be done on both devices.

Put console/PC IP in DMZ zone.

Port 88 (UDP)

Port 3074 (UDP and TCP)

Port 53 (UDP and TCP)

Port 80 (TCP)

Port 500 (UDP)

Port 3544 (UDP)

Port 4500 (UDP)

You can ask ISP(Internet Service Provider) for help

Hey MakeZ,

Since you have gone through several troubleshooting steps, if you could follow this link once more

forums.xbox.com/.../155724.aspx and provide us with the most up-to-date X, Y, and Z codes, that would be great. That way we can see the most current console network status.

Thank you!

Ok! So the Thomson TCW 770 is the only gateway you have connected to the Internet?

Since that is not recommended that you have UPnP, Port Forwarding and DMZ enabled at the same time, I would suggest that you turn off UPnP, DMZ and leave Port Forwarding turned on. Save/Apply these changes and reboot your gateway. Could you tell me how you've
configured Port Forwarding?

From the looks of it, it seems that your ISP is the one doing any necessary update regarding the firmware on your Thomson gateway.

I am sorry, i made a mistake, it is not a cisco, it is a thomson tcw 770. Port Forwarding and DMZ host are enabled and with the xbox's ip, in the Triggering part, i have put nothing....

BTW, how can I know if the router is up-to-date with the latest version?

Done! Is it OK like this?

[View:http://img38.imageshack.us/img38/6704/76901948.png]