When I turn on the xbox series s, the button flashes, turns back off and beeps one time....

Thank you for contact us! I'm Anderson, an Independent Consultant and a Microsoft user like you.

good morning

try this procedure

If there is a disc in the console, eject it.

On the console, press and hold the Xbox  button for 10 seconds to turn it off.

Press and hold the Xbox  button and the Eject button until you hear a beep to turn on your console. You will hear a beep immediately and a second beep 10 seconds later. The power light will flash before the second beep. Do not release until you hear the second beep or see the console boot into low resolution mode (the Xbox startup screen will appear slightly pixelated).

Note If you have an Xbox Series S or Xbox One S All-Digital Edition, you will need to press and hold the Xbox  button and the Pair button, as your console does not have an Eject button.

Hi there,

May be worth trying the following steps to reset the xbox s video settings.

1. If there's a disc in the Xbox One console, eject it.
2. On the console, press and hold the Xbox button for five seconds to turn off the console.
3. Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console. You will hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep.
   DO NOT LET GO until the second beep occurs.

Hello, Terrence R. I’m Arturo, and I’ll be glad to provide assistance with your inquiry today.

I’m sorry to hear about this, and I would like to ask if you tried each one of the following potential solutions:

A. Connect your console in another room.

B. Change the power cable of your Xbox Series S.

C. Connect your console to a different plug.

D. Reset the internal power supply.
To reset the internal power supply, follow these steps:
Unplug the power cord from the console.
Wait 10 seconds.
Plug the cord back into the console, and then press the Xbox button on the front of the console.

Reference link:

https://support.xbox.com/help/hardware-network/console/console-wont-power-on

I’ll remain attentive to your comments.

Thanks for taking the time to read me,

Arturo.

Just to confirm, are you trying to do the steps below in sequence?

If there's a disc in the console, eject it.

On the console, press and hold the Power button on the front of the console for 10 seconds to turn off the console.

Press and hold the Power button and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. Don’t let go until you hear the second beep or see the console start up in low resolution mode (the Xbox startup screen will appear slightly pixelated).

Note If you have an Xbox Series S or Xbox One S All-Digital Edition, press and hold the Xbox button  and the Pair button  instead, as your console doesn’t have an Eject button.

In either case, this will start up your console in low resolution mode (640 × 480).

Thank you for contact us! I'm Anderson, an Independent Consultant and a Microsoft user like you.



good morning

reset your xbox to default resolution and use another resolution.

If there is a disc in the console, eject it.

On your console, press and hold the Xbox  button for 10 seconds to turn it off.

Press and hold the Xbox  button and the Eject button until you hear a beep to turn on the console. You will hear a beep immediately and a second beep 10 seconds later. The power light will flash before the second beep. Don't let go until you hear the second beep or see the console boot into low-resolution mode (the Xbox boot screen will appear slightly pixelated).

Note If you have an Xbox Series S or Xbox One S All-Digital Edition, you will need to press and hold both the Xbox  button and the Pair button as your console does not have an Eject button.