When i turn on my xbox, the tv says that there is no signal. What do i do?

My apologies, I forgot to add this:

* If you have an all-digital console like the Xbox One S all-digital edition or the Xbox Series S, you can do the display reset and bring up the startup troubleshooter using holding the BIND button only.

Hi, Jose! Thank you for reaching out.
I'm AJ, an Independent Advisor for the Xbox Community.
I'm sorry you are experiencing issues with your console.

- Do you, by any chance, have a different HDMI cable you could try with your console?

- Besides your TV, do you have any other external devices plugged into your console?

- Alternatively, would you mind giving these a try?

--------

Power cycle your devices:

• Press and hold your console's power button until it shuts down.
• Unplug all external devices from the console.
• Unplug your console's power cord for 5 minutes.
• Turn your TV off and unplug it for 5 minutes.
• Plug everything back together
• Turn your console on and check if the issues persist.

--------

Display reset:

• If there's a disc in the console, eject it.
• On the console, press and hold the Xbox button for 10 seconds to turn off the console.
• Press and hold the Xbox button and the Eject button until you hear a beep to turn on the console.
You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.

--------

Xbox Startup Troubleshooter:

• Power off your console, and then unplug the power cord to ensure that the console is completely powered off.
• Wait 30 seconds, then plug the power cord back in.
• Press and hold the BIND button and the EJECT button, and then press the Xbox button on the console.
• Continue holding the BIND and EJECT buttons for 10-15 seconds.
• Listen for two “power-up” tones a couple of seconds apart. You can release the BIND and EJECT buttons after the second power-up tone.
• The console should power up and take you directly to the Xbox Startup Troubleshooter.

--------

Please let me know if either of these makes a difference, I'll be looking forward to your reply.
Best regards.

Hello Alyson,my name is Oskayra, I will be happy to help you in any way possible.

I am very sorry for what you are going through, if the HDMI cable is damaged or not properly connected, the video signal may not reach the Xbox correctly. Check your HDMI cables to make sure they are properly connected to your devices and are not damaged. Try using another high speed HDMI cable.

Source:https://support.xbox.com/help/hardware-network/oneguide-live-tv/poor-video-performance

I hope the information is helpful to you, if not, let me know that I will be happy to continue helping you, good luck and happy day.

Sincerely,
Oskaira.

When I do that nothing comes up on my screen, my monitor has the yellow light on it meaning that its turned off, what it does is turn on, say no signal and turn off.

I'm thinking along the same lines as Genchy. Might be a way to prove this theory, but only if your TV displays a "No Signal" message if it is left on without an input signal of any kind... My TV does this and I'd imagine many others do.

If your TV does in fact display a 'No signal' message when there is nothing turned on but the TV and it's getting no signal, then all you have to do is the following.

Once you've verified that all devices are off and your TV has no signal, put your Xbox in Energy Saver mode and turn it off, while leaving your TV turned on. You should see the 'No Signal' display.

After that, turn on your Xbox (and only your Xbox), put it in Instant On mode and then turn it off again. If the Xbox does put out some kind of signal (even if it's just a blank), then you'll just see a blank screen with no indicator.

If this is the case, then I doubt there is much you can do to resolve it, unless you have a remote you can use with the switch. But at least you'd know for sure.