We can’t get the PXN V9 steering wheel set to connect with xbox one. The cord it came with...

Good evening, Savannah.

Thanks for reaching out to our Microsoft Community Forum. Please accept our warmest regards and sincerest hope that all is well.



We understand that you're PXN V9 steering wheel that's connected to your Xbox console will just turn off after a few seconds after being powered on.

This issue may be caused by settings in the Xbox that need to be changed. Or it may also be a problem with the sterring wheel itself. So, here are some troubleshooting steps you can try:

1. Make sure that the USB cable is securely connected to both the steering wheel and the Xbox console.

2. Try connecting the steering wheel to a different USB port on your Xbox console.

3. Check if there are any firmware updates available for your PXN V9 steering wheel and install them if there are any.

4. Try resetting your Xbox console by unplugging it from the power source for a few minutes and then plugging it back in.

If none of the steps above work, you may need to contact the manufacturer of the PXN V9 steering wheel for further assistance. Refer to link below.

https://www.e-pxn.com/contact-us



Feel free to reply to this thread if you need further clarification.



Sincerely,





Forum Moderator

Microsoft Community

Depending on which Xbox controller you're using you'll need either a mini USB or USB-C cable. Older controllers use mini USB

I had the same problem and here is the story/solution.

The PXN V9 is a dual mode wheel (racing wheel and gamepad).

If you connect the shifter it becomes a racing wheel. (The problem is it's not recognized by most games).

If you un-connect the shifter it becomes a gamepad and you can play almost all racing games that support gamepad games with it.

And you can map buttons with the app too.

There is no way to shift from gamepad mode to wheel mode without un-connecting the shifter to my knowledge.

PXN other wheels including the V900 are just recognized as a gamepad, no wheel mode.

The diagram (up) is the one for the V900 who do not use a shifter and is always in gamepad mode.

So by not plugging the shifter it transform the V9 into a V900 and you play in gamepad mode in racing games.

Hi there! This is Ronnie, an independent advisor.

Nice to meet you and I hope you are having a great day!

I understand you need help with your steering wheel problem.

You can check this thread and see if this can help you out:

https://answers.microsoft.com/en-us/xbox/forum/...

Have you followed their guide to connect the pxn v9 to the console, including plugging a controller into it?

Their PDF support guide is here: V9风琴折说明书2021.11.26 (e-pxn.com)