Ubiquiti Ubiquiti Air Router: Strict nat since moved to WISP

DazzledChain444 · Jul 30, 2018

Ubiquiti (Routers) Ubiquiti Air Router: Strict nat since moved to WISP
Check this link for a possible solution:
https://support.xbox.com/en-US/xbox-one/networking/nat-error-solution

:)

WhyYouBeJelly · Jul 30, 2018

Ubiquiti Ubiquiti Air Router: Help I need to make changes on My Router

Ubiquiti (Routers) Ubiquiti Air Router: Help I need to make changes on My Router
I am currently running an all Ubiquiti Unifi setup with no issues so I may be able to help you out if you are using Unifi equipment, and still need help. UPNP is typically in the controllers settings and once enabled the Xbox should have no issue connecting.
You may have to give your XB a Static IP. If you are using edge router equipment or the Air series I may still be able to help but I am going to have to do some research.

Here is a link to the Ubiquiti Forums that may help as well.

Ubiquiti Networks Community

jmcode · Jul 30, 2018

NAT issues Strict 90% of time Moderate 10%

As best I can tell from Google, your "modem" is not really a modem but some sort of Ubiquiti AirMax wireless broadband device (GP-B240-100 appears to be the model number of its power supply, not the device itself) that you are using with Metalink, which
is a Wireless Internet Service Provider (WISP). This means you are ultimately connected to a wireless AP and are behind a NAT router over which you have no control (your WISP's). There is probably nothing you can to get Open NAT, other than get a new broadband
ISP (cable or DSL). Adding your own Linksys router to the mix just complicates matters by creating a double NAT situation.

M3tal Daz3 · Jul 30, 2018

Check this link for a possible solution:
https://support.xbox.com/en-US/xbox-one/networking/nat-error-solution

M3tal Daz3

Check this link for a possible solution:
https://support.xbox.com/en-US/xbox-one/networking/nat-error-solution

Mikey Man 2171

I am currently running an all Ubiquiti Unifi setup with no issues so I may be able to help you out if you are using Unifi equipment, and still need help. UPNP is typically in the controllers settings and once enabled the Xbox should have no issue connecting.
You may have to give your XB a Static IP. If you are using edge router equipment or the Air series I may still be able to help but I am going to have to do some research.

Here is a link to the Ubiquiti Forums that may help as well.

https://community.ubnt.com/t5/forum...ced=false&allow_punctuation=false&q=xbox+live

jmcode

As best I can tell from Google, your "modem" is not really a modem but some sort of Ubiquiti AirMax wireless broadband device (GP-B240-100 appears to be the model number of its power supply, not the device itself) that you are using with Metalink, which
is a Wireless Internet Service Provider (WISP). This means you are ultimately connected to a wireless AP and are behind a NAT router over which you have no control (your WISP's). There is probably nothing you can to get Open NAT, other than get a new broadband
ISP (cable or DSL). Adding your own Linksys router to the mix just complicates matters by creating a double NAT situation.

Ricardo Cintra

I Liked Cisco and Netgear too, I Use a UniFi from Ubiquiti for Wireless and I Use a TP-Link Router

Mr RoterigoT

@taidara, I guess you haven´t read everything. The issue is visible when the Xbox is configured with different power settings. No issues with NAT or ports being closed or similar, otherwise it would be consistent always regardless of these settings. Would you agree?

The Xbox is 3,5mts away, line in sight with the AP, within the same room. It´s connected to an Ubiquity LR (UniFi Long-Range Access Point – Ubiquiti Inc.).

Ubiquiti Ubiquiti Air Router: Strict nat since moved to WISP