TV settings(selected the wrong one-now i see nothing)

HSCDRPOUTDBD · Jan 18, 2014

So this morning i changed my settings on my one trying to get rid of the black bars on the side of my screen when i went to live tv. so i went to the tv settings, selected the wrong option and now all i have is a blank screen, this type of setup usually
has a feature like "do you like these settings"(aka settings should revert if you dont accept them).

-now i have a console that wont display anything, so i cant see to make my changes

-any help would be greatly appreciated

:)

bailece · Jan 18, 2014

how do you reset the one guide settings to default

I was setting up One Guide through the cable box and selected the wrong tv screen type. Now the screen is smaller when watching tv. How do I reset this so it fixes this problem/

Thanks for your help

STILL ITCHIN EM · Jan 18, 2014

display setting screw up

Anyone kno how to reset the display settings? I need to reset them and i cant the settings on my tv cuz i selected the wrong setting.

Iautorenewedu · Jan 19, 2014

support.xbox.com/.../tv-or-monitor-screen-is-blank-while-connected

Let me know if that works for you,

-Cheers

TECHNOx420 · Nov 1, 2018

First while console is on hold down power button for 8 seconds, let it sit for 10 seconds, then hold down the eject and the power button at the same time till the console powers on and it should boot up in low resolution mode then you can just re-run the
tv set up to auto detect the best resolution for your tv.

TECHNOx420

First while console is on hold down power button for 8 seconds, let it sit for 10 seconds, then hold down the eject and the power button at the same time till the console powers on and it should boot up in low resolution mode then you can just re-run the
tv set up to auto detect the best resolution for your tv.

Iautorenewedu

support.xbox.com/.../tv-or-monitor-screen-is-blank-while-connected

Let me know if that works for you,

-Cheers

Alan Oursland

I ran the Kinect setup and it didn't help. But I found something else weird.

When I do "TV Setup" it says it has detected my TV. When I press Next it kind of locks up for maybe 10-20 seconds before returning to the main TV settings page. It selects code T0810.

Then if I go back to "Device control" and select "Device power options", everything is set to "Nothing". The option lists only display "Nothing". I don't have the option to send power on or power off signals to my tv. Again, the Xbox won't accept input for
a few seconds after I open the options list.

I'm trying to look up the code for my tv right now to see if it matches the one the Xbox selects.

My tv model btw, is a Sony KDL-55w802a.

Alan Oursland

I talked to support online and after an hour or so of troubleshooting, including resetting my One to factory settings and making me reinstall everything (arg!), they said my Kinect was broken and shipped me a new one.

The new one arrived today and it doesn't work either.

Because the power on settings are limited, I am highly suspicious that it is detecting the tv and cable box badly and selecting bad codes. The code it is selecting for my Sony tv is "". The code it is selecting for the cable box is "". I think these are
basically empty feature sets that don't send any IR signal for any commands and that is why I don't see the IR signal. I can't find codes for the Kinect anywhere.

I guess I'll contact support again and they will probably have me send in my entire console when there is likely nothing wrong with it.

Cowgrlzroc

If this is an Xbox one - Open the guide, and then select System > Settings. Under Display & sound, select Video output. Select TV resolution, and then choose either 720p, 1080p or 4K UHD, whichever is best for your new TV. If you don't see the resolution
for your TV, set TV connection to Auto detect.

I hope this helps,

Cowgirl

TV settings(selected the wrong one-now i see nothing)