Trying to use quick switch device feature on Elite 2 controller using PC

There was a new update released, can you try updating your Elite Series 2 controller again?

I also have the Elite Series 2 controller and I do not run into these issues when using it with the PC.

Hi ViperMagma, I hope you're doing great out there despite the issue that you're experiencing. I am an Independent advisor and I am here to help you in regards to your concern.

The Xbox Wireless Controller that comes with Xbox Series X|S includes a feature that allows for quickly switching between a paired Bluetooth device and an Xbox console. If the controller is connected to a Bluetooth device, double-press the Pair button, and the controller will immediately switch its connection to the last Xbox console it was paired to. Then, to switch back to the paired Bluetooth device, press and hold the Pair button to start pairing mode. The controller will automatically connect to the Bluetooth device you were just using while it also searches for new devices – just in case you want to connect a different Bluetooth device or Xbox. If it doesn’t find a new device nearby in pairing mode, it will remain connected to the previous Bluetooth device.

As of the moment, the said feature is not yet available on Xbox Elite Series 2. But what I always do is make sure that when you turn on your devices such as PC or Laptop, the Bluetooth is turned off then turn the controller on first before turning on the Bluetooth for it to automatically reconnect.

I have the same issue:

* the plain Xbox controller (non elite) connects via bluetooth to the TV and is recognised by the Xbox cloud app on my Samsung TV. I can use it to play games using the Samsung Xbox app.

* the brand new Xbox Elite Series 2 controller connects via bluetooth to the TV and is NOT recognised by the Xbox cloud app.

I tried several attempts deleting the pairing, re-pairing. Turn off TV on the power switch. Re-installing the Xbox app on the Samsung TV.

The result is always the same:

* The Xbox Elite Series 2 controller connects successfully to the TV and is shown as Paired and Connected in the Samsung TVs feature where you add external devices.
* But the Xbox app shows the yellow ! exclamation mark and does not recognise the Elite Controller.

I’ve paired my other non Elite standard Xbox controller now vie Bluetooth and USB, which works both.

Hello Yeddy Yordan,

Thank you for sharing this with us and welcome to Xbox Forums.

Based on the information you provided, it seems that you're having trouble connecting your Xbox Elite Series 2 controller to the Xbox Accessories app on your PC. There could be several reasons why your Xbox Elite Series 2 controller is not connecting to the Xbox Accessories app on your PC or through Bluetooth. Nothing to worry, we'll work on this together.

Before we proceed, I will be asking you few questions to help us understand the concern further:

1. Have you tried connecting the Xbox Elite Series 2 controller to a different PC or Xbox console to see if it connects?
   
2. Have you checked if the USB-C cord you are using is working properly by trying a different cord?
   
3. Have you tried updating the firmware on the Xbox Elite Series 2 controller through the Xbox Accessories app on your PC?
   
4. Have you checked if your PC's Bluetooth is turned on and discoverable?
   
5. Have you tried removing any other Bluetooth devices from your PC's Bluetooth settings to see if that helps the Xbox Elite Series 2 controller connect?
   

In the meantime, please ensure that your PC meets the minimum system requirements for the Xbox Accessories app. You can check the system requirements on the Microsoft Store page for the app.



Next, please try the following steps to troubleshoot the issue:

• Make sure that your Xbox Elite Series 2 controller is fully charged. You can charge it using the USB-C cable that came with the controller.
  
  
  
• Try connecting the controller to your PC using a different USB-C cable. Make sure that the cable is fully inserted into both the controller and the PC.
  
  
  
• If the controller still won't connect via USB, try resetting the controller. To do this, press and hold the Pair button on the back of the controller for 3 seconds, then release it. The Xbox button on the controller should start flashing rapidly, indicating that it's in pairing mode.
  
  
  
• If the controller still won't connect via USB, try connecting it to a different USB port on your PC.
  
  
  
• If the controller won't connect via USB, try connecting it to your PC via Bluetooth. To do this, press and hold the Pair button on the back of the controller for 3 seconds, then release it. The Xbox button on the controller should start flashing slowly, indicating that it's in pairing mode. On your PC, go to Settings > Devices > Bluetooth & other devices, then click "Add Bluetooth or other device". Select "Bluetooth" and follow the on-screen instructions to pair the controller.
  
  
  
• If the controller still won't connect via Bluetooth, try resetting the controller and your PC. To reset the controller, press and hold the Pair button on the back of the controller for 20 seconds, then release it. To reset your PC, go to Start > Power > Restart.
  

If none of these steps work, please try updating the firmware on your controller. You can do this using the Xbox Accessories app on your Xbox console. Connect your controller to your console using a USB cable, then open the Xbox Accessories app. Select your controller, then select "Device info". If a firmware update is available, follow the on-screen instructions to update your controller.



I hope this helps you with the issue for your Xbox Elite Series 2 controller. If you have any further questions or concerns, please don't hesitate to ask.

Kind regards,



Microsoft Community Moderator

Hello Ronnie thanks for your response. I have tried using different controllers. The Xbox one s controller and nintendo switch pro controller seem to be working fine and I have no issues with them. It's just the Elite 2 that has this problem sadly.

Edit: I've also tried using a different device and the same thing happens