Siemens: Port Forwarding

Discus and support Siemens: Port Forwarding in XboX Networking Hardware to solve the problem; Siemens (Modems/Gateways): Port Forwarding Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup)... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Sep 12, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Siemens: Port Forwarding


    Siemens (Modems/Gateways): Port Forwarding
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – (created during initial setup)
    Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
    3. Under the section titled setup, select port forwarding from the menu on the left.
    4. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
    5. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
    6. Select Apply.


    Disable Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
    3. Under the section titled setup, select port forwarding from the menu on the left.

    :)
     
    XB1R Hades, Sep 12, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Siemens: Port Forwarding

    Siemens (Modems/Gateways): Port Forwarding
    Siemens Gigaset SE567



    Standard Version

    Login Information

    Gateway - 192.168.254.254

    Username - admin

    Password – admin



    Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and admin for the password if the gateway asks.
    3. Under the section titled setup, select port forwarding from the menu on the left.
    4. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
    5. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
    6. Select Apply.


    Disable Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and admin for the password if the gateway asks.
    3. Under the section titled setup, select port forwarding from the menu on the left.
    4. Click the Delete button next to the entry that refers to port number 3074.


    Telus Version

    Login Information

    Gateway - 192.168.1.254

    Username - admin

    Password – telus



    Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.1.254 into the address bar. (Or click the link) When prompted enter the “admin” for the username and “telus” for the password if the gateway asks.
    3. Select Advanced Settings from the menu at the top.
    4. Select Internet
    5. Select Port Forwarding from the menu on the left.
    6. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
    7. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
    8. Select Apply.


    Disable Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.1.254 into the address bar. (Or click the link) When prompted enter the “admin” for the username and “telus” for the password if the gateway asks.
    3. Select Advanced Settings from the menu at the top.
    4. Select Internet
    5. Select Port Forwarding from the menu on the left.
    6. Select Delete under the delete column next to the Xbox (3074) entry.
    7. Click the Apply button at the bottom right of the page.
     
    XB1R Athena, Sep 12, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Siemens: Port Forwarding

    Siemens (Modems/Gateways): Port Forwarding
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – admin



    Port Forwarding

    1. Open a web browser.
    2. Enter 192.168.254.254 into the address bar. When prompted enter admin for the user name and admin for the password.
    3. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
    4. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
    5. Select Apply.
    Disable Port Forwarding

    1. Open a web browser.
    2. Enter 192.168.254.254 into the address bar. When prompted enter admin for the user name and admin for the password.
    3. Find the port you want to remove and select Delete.
    4. Select Apply.
     
    XB1R Athena, Sep 12, 2014
    #3
  4. IIIN3CR0515III Win User

    Sagemcom Siemens Speedstream 4300: Port Forwarding

    By doing this will this make my NAT change from "Strict" to Open?
  5. VibroPlex Win User

    Xbox connects to internet, fails connecting to XBL

    Some NAT problems are subtle and don't appear in the Test Xbox Live Connection test. Most likely there's a port blocked... ports can be blocked in your router, modem, or at your ISP. Since the Xbox 360 uses different ports than PCs & Macs use, you can't
    see the effect of a port blockage except on the Xbox. A sequential power cycle is the first step in clearing a port blockage:

    1) turn off the Xbox then

    2) unplug the power from the Siemens.

    3) Wait at least 30 secs then replug the Siemens power.

    5) Wait 'til the light on the front of the Siemens which says DSL is on solid (not flashing), then turn on the Xbox.

    If that does not resolve it, then the next step is to make sure UPnP is enabled. I see your Siemens uses 192.168.1.1 as the IP address, so go to a web browser (IE, Firefox and Safari preferred), enther the IP address in the address bar, and go to the control
    panel of the Siemens, then find the UPnP setting and make sure that's enabled.

    If that does not resolve it, then set up Port Triggering to make sure port 3074 opens up for UDP and TCP and port 88 opens up for UDP when the Xbox needs it.
  6. taidara Win User

    Cant connect too most players

    Hey there Sludg!

    Can you confirm that your Siemens Model 4200 is just a cable modem and not with built in router. Just to rule out that your not having double NAT layers.

    You should also secure your wireless network.

    Make sure that your router's firmware is up to date.

    Just a note: When opening ports with Port Forwarding make sure you have disabled UPnP and DMZ.
  7. John Dowding Win User

    Port Forwarding

    Doesnt it get a bit repetitive just running around shooting people Strange?
  8. signoftheserpent Win User

    Port Forwarding

    That's what I've done.

    I think really the problem is the game.
Thema:

Siemens: Port Forwarding

Loading...
  1. Siemens: Port Forwarding - Similar Threads - Siemens Port Forwarding

  2. Roblox studio port for xbox one dev mode

    in XBoX on Windows
    Roblox studio port for xbox one dev mode: Im looking for a roblox studio port for xbox dev mode dose anyone know a website that I can download a compatible roblox studio uwp from then please let me know Im also wondering if the normal uwp...
  3. Remote play dependant of HDMI port

    in XBoX Games and Apps
    Remote play dependant of HDMI port: I'm experiencing a persistent issue with Xbox Remote Play. To make it work, I have to disconnect the HDMI cable from the console and restart it. If I don’t, the stream shows in less than a quarter...
  4. Does local co op work on Star Wars Clone wars port to Xbox360?

    in XBoX Games and Apps
    Does local co op work on Star Wars Clone wars port to Xbox360?: Trying to get the local co op to work but player 1 renders over the top of all other players screens. There is another thread for this question but the reply doesnt help at all. Just wanting to...
  5. Port foward ports for best experience

    in XBoX on Consoles
    Port foward ports for best experience: What ports to open for best cloud gaming c4334bed-d70c-4961-b032-2fc11f944916
  6. HDMI port for Xbox

    in XBoX on Windows
    HDMI port for Xbox: Hello, Currently I have 1080P TV and the TV has two HDMI ports. One is labeled ARC, so I have Xbox Series X connected there and the other is called MHL and I have my firestick connected to that, I...
  7. Xbox x series usb port is broken what can i don to have it fixed

    in XBoX on Consoles
    Xbox x series usb port is broken what can i don to have it fixed: usb port on the xbox series x is broken how can it be fixed 6e6ec7b9-b22f-4121-a982-aed9188f233f
  8. I have a usb microphone. If I buy an adapter that will connect it to the aux port on my...

    in XBoX on Consoles
    I have a usb microphone. If I buy an adapter that will connect it to the aux port on my...: I have a usb microphone. If I buy an adapter that will connect it to the aux port on my Series S controller, will it work? 16fff14d-04ee-4bd6-96cb-7a83750e64f4
  9. Can I port my old Xbox 360 account onto my PC.

    in XBoX Games and Apps
    Can I port my old Xbox 360 account onto my PC.: I'm going to transfer some of my Xbox 360 games onto my PC via ISO files, and then use Xenia to play them. I just wanted to know if I can bring my account across with them or at least my progress...
  10. I do have a question, if possible can we please get backwards compatibility or just ports...

    in XBoX Games and Apps
    I do have a question, if possible can we please get backwards compatibility or just ports...: Just asking because I would LOVE to play my Sonic heroes copy on my Xbox one/series X 6f35c3d8-419a-477d-af7c-e76538c46463