Remove cable box from Tv App?

You want to use the TV app on your TV through the console, or the TV app on your Xbox onto your TV?

A standard HDMI will get the Xbox on your TV but you will need another HDMI cable from your cable box to the XBox like a pass through.

Hi, should the above not resolve the issue, power the console off and remove the power cable from the console, also power off your cable tv box and remove the mains plug from the power outlet, Wait two minutes, power up the cable box first and once that's
fully booted up reconnect the console power cable and power up the console.

I think it would work if you remove the SCART cable between the Virgin box and the TV, and move the other SCART cable going to the home theater system from the Virgin box directly over to one of the SCART inputs on the TV.

Check the cables to see if they have any labels on the connectors. If one end is labelled "TV" and the other "DVD" or similar, it's wired to carry signals in one direction only. If you have a cable like that, use it between the Virgin box (DVD labelled end)
and the home theater system (TV labelled end), and the other cable between the TV and the home theater system. If both cables are labelled this way, you need to pick up a fully wired SCART cable to go between the TV and home theater system.

Connected that way, the DVD player will input picture straight to the TV instead of going through the Virgin box, and the sound from both the Virgin box and the Xbox 360 will be sent to the home theater system back through the SCART cable.

If this works, then leave Dolby Pro Logic II enabled for both games and TV - both will benefit from it.

Hope that this helps.

I have a Samsung television and a rogers cable TV box. Both the television and the cable box turn on just fine.

It is only the soundbar that does not power on. What's strange is that the mute voice command is required twice, however only one input from the smart glass app is required.

TV code set T2051

Cable box Code set C1877

Soundbar code set. M2660

Because I'm moving I unhooked the XB1 and connected the cable box directly to the TV. I was quite stunned at the video quality improvement of Live TV when the XB1 was removed. I don't know if this a new degradation or if it's always been there as I've used
the XB1 and Live TV app pretty much from day one of the XB1 release.

Essentially, the HD DPI looks less and the picture looks slightly fuzzy when compared to direct to TV from the cable box.

My guess is MS is not working on this since no one has responded in over a month.

This is not specific to DirecTV as I've always been a Comcast customer. Will be DirecTV after the move though.