Please tell me how to fill out "Port Triggering" as shown for doublenat issues.

PerryBruner · Aug 16, 2020

Please tell me how to fill out "Port Triggering" as shown for doublenat issues.
Hello

I was given the folowing advice to aleviate doublenat on my xbox one x

she said

Port 88 (UDP) Port 3074 (UDP and TCP) Port 53 (UDP and TCP) Port 80 (TCP) Port 500 (UDP) Port 3544 (UDP) Port 4500 (UDP)

This info is also in the video description.

pLease look at the page where i can configure port triggering.. and tell me how and where I am supposed to enter those values in what place on the form?

it only gives me one time to select UDP and all that

yet the advice above says for me to enter different one for each number

but I have to have a number for TO and FROM.. but theyre differnt UDP.. then TCP.. etc.

Please look at this unlisted video and tell me what to enter and where.

THank you,

here is the link It is UNLISTED so only you with this link posted in this question can view the video

I am not trying to get views .. I just didn't know how else to ask you this quesiton without a vidual aid.

Link is;

https://www.youtube.com/watch?v=NtVRZlfUnks&feature=youtu.be

:)

EricCable

“Triggering” is iffy , “Forwarding” works better. But the trick is making sure the device gets thr same IP , so look for a DHCP reservations or IP fixing - then any “rule” you setup will stick. If multiple consols are involved , then getting a better router
and bypassing the gateway are the only answer.

t0ph3r0us

Someone please answer this... I am having the exact same issue when playing GTA online.

When I do a network test on my xbox it occasionally tells me the NAT error while other times tells me to open port 3074 and turn on UPnP. And then other times it does not show an error after testing.

I have tried both PassThrough Mac Address and DMZ... Port forwarding and port triggers...

An answer to this issue would be awesome.

Thanks!

EatingBoat68

I suggest you use Port Triggering to allow for the XBox live ports to be opened.. the ports to port trigger are as follows: 53, 80, 88, 3074. Respectfully speaking, once you have set the ports to trigger you shouldn't have any more issues with your NAT
type, but then again, that is not always the case, give this a try and see how if it works and let me know

PalZer0

Hi there.

-

Port triggering is not what you're looking for. Please delete those entries from your port triggering list and see how you go from there.

hiwired

here is a list of ports you will need to open in your router this can be done in application firewall setting or port triggering for multiple xbox on same network support.xbox.com/.../network-ports-used-xbox-live

for instructions and how to on your router please visit
http://portforward.com/

Once the ports are opened please unplug the router for 30 seconds

Then hard restart your Xbox by holding the power button on the console until it turns off.

This should fix the issue

In your case you will need to setup port range triggering for multiple Xbox on same network

Please tell me how to fill out "Port Triggering" as shown for doublenat issues.