Please, I beg you, add joystick calibration to the Xbox

The analog joystick... Cursor going in any direction it wants to ... Without touching the joystick... You can calibrate your joysticks... Or re-center them... There is a setting somewhere in the 360... Calibrate analog joysticks or calibration settings for
joystick... Calibrate your joystick... I have seen it before but cannot locate now

But it resets or recenters/realigns your joysticks so it doesnt drift all over your page... Your cursor

Since the Xbox One does not support recalibration of the Xbox One controller your stick will keep drifting, this is a hardware and not a software issue. Through friction the sensitive parts inside the stick mechanism shift/move/wear out giving it a false
reading which makes it drift.

It has been suggested on the feedback website so if you vote maybe this feature will be added in the future

xbox.uservoice.com/.../6053939-add-require-analog-stick-calibration

If you use it on pc you can just keep using it, you just have to recalibrate the sticks, as this is compensated by the software on your pc this will not carry over to your xbox

www.wikihow.com/Calibrate-a-Joystick

The only solution is to send it off to repair, but it might be better to buy a new one

Then after you clean your room to have enough space to calibrate the Kinect you must get on your knees and beg it to please let you play a game.

Hello PepeMz, My name is David. I am an independent advisor, happy to help you today.

These glitches can be a little frustrating

First connect the controller to your Xbox console or PC and check if firmware updates are available. If an update is available, follow the instructions to update the controller firmware. Firmware updates can fix compatibility issues and improve controller performance.

Then clean the joystick Sometimes the buildup of dirt, dust, or debris can affect the performance of the joystick. Use compressed air or a cotton swab lightly moistened with ********* alcohol to gently clean around the joystick and remove any dirt or debris that may be present.

Finally, calibrate the controller, try calibrating the controller in Xbox settings. Go to Settings > Devices and accessories > Your controller > Configure > Calibrate. Follow the on-screen instructions to calibrate the controller joysticks.
Calibration can help correct problems with incorrect response or lack of registration.

Best regards.

Hello Troll2, My name is David. I am an independent advisor, happy to help you today.

I'm sorry you're going through this.
We will try to repair it
The right analog stick may be out of calibration. Try calibrating your controllers by following these steps:

Connect your controller to the Xbox.
Go to your Xbox console settings and select "Devices and accessories."
Select the controller you want to calibrate and then select "Calibrate."
Follow the on-screen instructions to calibrate the controller.
Once the calibration is complete, check if the right analog stick is working properly.

It is also possible that the right analog stick is dirty or has debris that is affecting its operation. Try to carefully clean the joystick with a soft, lint-free cloth. Avoid using strong liquids or chemicals as these could damage the controller. After cleaning it, check if the joystick works properly.

Best regards.