No tv at start-up

I can never get a tv signal at start-up unless I do a power cycle. This has been the case for a week. Getting kinda annoying. Anything I can do?

:)

 

at start of xbox one the tv is in 720p

Hello when i m selecting 'tv at start up' , the picture is in 720p instead my signal is in 1080i ? Can you help me to have 1080i signal at start up of tv in xbox one ?

thx

 

(0x8027025a) Live TV error code help please

I am unable to look at live tv anymore. it says

Please Try again

For some reason it took too long to start (0x8027025a)



also; the xbox one no longer has control over my tv and cable box. anymore i am also unable to locate the tv set up

 

Mine quit working too. Since the November update. I have a DirecTV genie hr44 sat box. Work fine before now it does not. I did everything to get it to work. It has to be the new update.

 

Hey there wampler13!

Sorry to hear about the TV issues! I recommend doing a full power cycle, followed by resetting TV settings. Follow these steps to do both of those!

To power cycle the Xbox One console:

• Press and hold the power button on the Xbox One console for 10 seconds.
  
• Once the unit is powered off, unplug the power cable from the Xbox One and let it sit for 5 minutes.
  
• Plug the power back into the unit and power the console on.

To reset TV settings, follow these steps:

• Press the Menu button on your Xbox One controller and select 'Settings'.
  
• In the Settings menu, select 'TV & OneGuide'.
• Select 'Troubleshooting'.
• Select Reset TV Settings.
• From here you can set up your OneGuide again.

Try those steps and let us know how it goes!

 

Did that just today like you instructed. It worked twice on startup and the third time I got the no signal screen again.

 

DesertFox1971,

Sorry to hear that didn't help with the issue. Do you happen to have 'Instant On' turned on? If so I suggest turning it off by following these steps below:

• Press the menu button on your Xbox One controller and select 'Settings'.
• In the Settings menu, select 'Power and startup'.
• Under 'Power options', switch the power mode to Energy-saving.

Post back and let us know how it goes!

 

I figured it out and posted the solution. You cannot have ARC audio return channel on . Turn it off or use an HDMI on your tv that does not have it.

 

Awesome! Glad to hear it got figured out, and thank you for letting us know what worked for you!