No ipv6 availability or option in my Xbox settings

Can not set sky hub to bridge mode. I have managed to get my nat open using IPv6, in my sky hub I went to security, firewall rules then enabled the IPv6 firewall and my nat is now open. It quotes the held section of the inbound services -

"Inbound Services Enable Inbound IPV6 IPSec Firewall: This option will enable/disable only the IPsec related inbound IPv6 firewall rules in router. It is independent of the Enable IPV6 Firewall option.

Enabling this option allows devices to use IPv6 natively to improve connectivity to services like the Xbox On"

As far as i know, there is no settings to change if you want to use ipv6 only. I wouldn't worry about it though. The Xbox One will always use ipv6 if available anyway.

Check IPv6 settings on your router

You will need to check your router’s confutation UI for an IPv6 settings page, and then look for the following options:

Allow Teredo tunnelling

Allow IPv6 tunnelling

Ok, tried everything. Well, let's start here:
Teredo Tunneling

Teredo is basically translating IPv6 traffic packets onto an IPv4 network, when there is no native IPv6 connection. One thing you can try is to avoid that altogether and allow traffic to an IPv6 network. That might require settings on Windows to be changed,
as well as the router, IN ADDITION to possibly contacting your ISP about enabling IPv6 traffic.

In Windows it can be as simple as "Changing Adapter Settings" for your Network Adapter and checking the IPv6 option, but for your Router and ISP, that availability can vary, and is different for each device.

Take a look into that, and if you have some details on your equipment, we can try to guide a bit on enabling that, if available.

Hope that helps!

Can you give me this for the Apple Version.

-I believe I have to go through the Airport Utility

-Select my device > Internet Tab > Internet Options

I have options for Configure IPv6 (Link-Local, Automatic, Manual) - set to automatic

IPv6 Mode (Native, Tunnel) - set to native

checkbox for Enable IPv6 Connection Sharing - Box is checked

Do any of these need to change??