No audio output from the system?

I have my audio system connected from my audio output on the back of my TV.

It's like it used to record from the mic and from the audio sent to the headset and audio sent to the speakers but now its the mic and only the audio output selected in the sound setting in the system tray on the windows task bar.

A few days ago I tried to do some research on your TV, but then the Argos web site was down. Now that I have found some info on the TV the forums keep acting up...

Anyway, I found photos of the mainboard from the TV and noticed there is a connection in between the optical output and the SCART connectors. It wasn't possible to tell from the photos if it was an input or an output however. It looks to me like it is an AV
input, but if it is an audio output - then that could be used for connecting to the home theater system.

What would be needed is a SCART adapter with an IN/OUT switch for the home theater system's SCART, plus a 2x RCA male-male audio cable to go between it and the analog audio output on the TV. The TV would then need to be set up to make sure the sound over the
audio output is unaffected by its volume control.

But if the connector on the back of the TV is not an audio output but an input, it might be that the sound from the TV cannot be connected to the home theater system.

Hopefully the forums will stop acting up, as I want to help you get this sorted out.

Ok so you're getting audio from other sources on your TV? Try resetting your audio settings -

Go to Settings and select System.

Select Console Settings, and then select Audio.

Select Digital Output, and then select the digital output used by your audio system:

Digital Stereo

Dolby Digital 5.1

Dolby Digital with WMA Pro: This setting enables WMA Pro pass-through if your receiver supports the WMA Pro format.

If not, try a different HDMI port

Hi,

Have you done the following;

Verify that sound is configured correctly

If your system uses optical digital or HDMI audio output, verify that the digital output is configured correctly. Here's how:

Note These steps apply only to systems that use optical digital or HDMI audio outputs.

Press the Guide button on your controller.

Select Settings, and then select System Settings.

Select Console Settings.

Select Audio.

Select the configuration option that matches your system.