Netgear: Wireless Security

Netgear (Routers): Wireless Security
Changing Wireless Security Type/ Disabling Wireless Security

1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
   
3. Once logged in, select Basic from the menu on the top.
4. From the menu on the left under the Setup section choose Wireless Settings
5. Under Security Options select the desired security type.
6. Select Apply.

:)

 

Netgear: Wireless Security

Netgear (Routers): Wireless Security
Login Information

• Gateway - 192.168.1.1, 10.0.0.1, or
  http://routerlogin.net
• Username - admin
• Password - password

Netgear Smart Wizard - Light Blue

How To Find Wireless Passphrase (WPA/WEP)

1. Login to router by entering
   http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
   
3. From the menu on the left under the Setup section choose Wireless Settings.
4. The wireless passphrase can be found near the bottom of the page.

Changing Wireless Security Type/ Disabling Wireless Security

1. Login to router by entering
   http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
   
3. From the menu on the left under the Setup section choose Wireless Settings.
4. Under Security Options select Disable.
5. Select Apply

Netgear Genie - Black/Purple

How To Find Wireless Passphrase (WPA/WEP)

1. Login to router by entering
   http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the username and password.
   
   the default user name and password are: "admin", "password".
3. Select Basic from the tabs at the top.
4. From the menu on the left under the Setup section choose Wireless Settings
5. The wireless passphrase can be found near the bottom of the page.

Changing Wireless Security Type/ Disabling Wireless Security

1. Login to router by entering
   http://routerlogin.net in to the address bar or by entering the default gateway IP address.
   
2. The router will then prompt you to enter the username and password.
   
   the default user name and password are: "admin", "password".
3. Select Basic from the tabs at the top.
4. From the menu on the left under the Setup section choose Wireless Settings
5. Under Security Options select the desired security type.
6. Select Apply.

 

Netgear: Wireless Security

Netgear (Routers): Wireless Security
Login Information

• Gateway: 192.168.0.1
• Username: admin
• Password: password

How to Find Wireless Passphrase (WPA/WEP)

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
   
3. When prompted, enter "admin" for the user name and "password" for the password.
   
4. Select "Security" from the "Access Point" section in the menu to the left.
5. The wireless passphrase will be labeled as "Passphrase".

Changing Wireless Security Type/ Disabling Wireless Security

1. Open a web browser.
2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
   
3. When prompted, enter "admin" for the user name and "password" for the password.
   
4. Select "Security" from the "Access Point" section in the menu to the left.
5. The only security type available for this device is WEP. To disable this security select "Open System" for the "Authentication Type" option.
   
6. Select Apply.