Netgear Netgear XAV2001: no network connection

There are significant differences in the ability of differing NETGEAR models when handling multiple Xboxen, as the Connectivity Rangers have reported at

http://forums.xbox.com/xbox_forums/xbox_support/networking-hardware/02-routers/netgear/default.aspx

Version 1 (or no version number) of the NETGEAR http://forums.xbox.com/xbox_forums/xbox_support/networking-hardware/02-routers/netgear/f/3110.aspx

Version 2 of the NETGEAR
http://forums.xbox.com/xbox_forums/xbox_support/networking-hardware/02-routers/netgear/f/3111.aspx

With either, select Updating Firmware for help with the process.

The problem with your set up is that you have two devices within your network (Linksys SPA2102, Netgear WNR2000) that performs NAT (Network Address Translation). Multiple layers, or double NAT environment is not a set up that support
UDP (User Datagram Protocol) over
NAT traversal.

So, what you have to do is either configure your Linksys to be operating in bridge mode, or change the order, for your Netgear to be the perimeter router of the route. This means that your Linksys terminates to the Netgear, by connecting from the Linksys
'Internet' (WAN) port, to a LAN port on the Netgear, and the Netgear then terminates to a modem, or wall socket (network).

All devices on your network that needs to communicate to the Internet-at-large, have to be connected to your perimeter router (Netgear).

Consult the manual for the Linksys 2102, how to configure in bridge/switch mode.

I would also suggest that you search google, how to bridge the Linksys.

Netgear WNR3500v2.

Only 1 xbox on the network, other internet connection then mike, but same provider (Ziggo)

Greetings Spruce Goosed![quote user="Spruce Goosed"]If Wireless, are you using a white or black external adapter, or an internal (Xbox 360S) adapter? Netgear WNCE 2001[/quote]Is your Xbox connection setup through the wireless network adapter (Netgear WNCE2001)?