Netgear Netgear WNR2000: My Xbox won't connect to internet

You may want to do a hard reset on your Xbox One Console to see if there is any change if not:

1. Set DNS Server as Automatic or

2. Define DNS Server by yourself

[quote user="The Cello Guy"]Wall- Linksys SPA2102 - Netgear WMR2000 v2[/quote]Just to clarify, is your Netgear router (WNR2000) connected to the Linksys SPA2102's 'Ethernet' port? If so, I would recommend the other way around.

Connect the Linksys SPA2102 with an Ethernet cable, from the port marked 'Internet', to a LAN port on your Netgear WNR2000.

Now, don't connect any device to the 'Ethernet' port on your phone adapter.

When you change your set up, make sure both devices are powered off.

Try this method and let me know how that goes and we'll go from there.

Router is part of it, it also depends on your internet provider and the package you are receiving from them.

But for routers I usually recommend; Netgear WNR2000 - Best recommendation for the price. ~$45-$55 at most locations.

The problem with your set up is that you have two devices within your network (Linksys SPA2102, Netgear WNR2000) that performs NAT (Network Address Translation). Multiple layers, or double NAT environment is not a set up that support
UDP (User Datagram Protocol) over
NAT traversal.

So, what you have to do is either configure your Linksys to be operating in bridge mode, or change the order, for your Netgear to be the perimeter router of the route. This means that your Linksys terminates to the Netgear, by connecting from the Linksys
'Internet' (WAN) port, to a LAN port on the Netgear, and the Netgear then terminates to a modem, or wall socket (network).

All devices on your network that needs to communicate to the Internet-at-large, have to be connected to your perimeter router (Netgear).

Consult the manual for the Linksys 2102, how to configure in bridge/switch mode.

I would also suggest that you search google, how to bridge the Linksys.

Motorola surfboard ($70) and a netgear wnr2000 ($40) fixed mine without any port forwarding .....just plugged them in....