Netgear Netgear CG814WG v2: Error 0x90070490

Netgear (Modems/Gateways) Netgear CG814WG v2: Error 0x90070490
You can look up all error codes here.

Hopefully it will have a solution to your problem.

Xbox Error Status Codes | Xbox Support

:)

 

Netgear Netgear CG814WG v2: DMZ

Netgear (Modems/Gateways) Netgear CG814WG v2: DMZ
Login Information

• Gateway - 192.168.0.1
• Username - admin
• Password - password

DMZ

1. Open web browser.
2. Login to router by entering
   http://routerlogin.net in to the address bar or by enter the default gateway IP address.
   
3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
   
4. From the menu on the left under the advanced section select DMZ Host.
5. Enter the IP address assigned to the Xbox console into DMZ Address.
6. Select Apply.

Disable DMZ

1. Open web browser.
2. Login to router by entering
   http://routerlogin.net in to the address bar or by enter the default gateway IP address.
   
3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
   
4. From the menu on the left under the advanced section select DMZ Host.
5. Enter a “0” into DMZ Address.
6. Select Apply.

 

Netgear Netgear CG814WG v2: UPnP

Netgear (Modems/Gateways) Netgear CG814WG v2: UPnP
Login Information

• Gateway - 192.168.0.1
• Username - admin
• Password - password

UPnP

*This feature is not available on this device*

 

Hey there Ivy!

When you saw the error comes up when trying to use the "internet" are you attempting to open Microsoft Edge to use your browser or is this when trying to do anything online as far as gaming or streaming?

I would recommend going to your Network Settings and "Testing Network Connection" Once you have tested network connection, If you see a
specific error message you are going to select "No: I got an error message" and then go from there.

I hope this helps!

 

Thanks, but i cant even open my Network Settings.

I'm thinking of taking it in or getting a new one, but thank you again.

 

Hello IvyCreech,

Thank you for keeping us updated. Is this console enrolled in the Xbox Insider program? We recommend performing a power cycle on your console and network hardware. We will provide steps on how to complete this process. Be sure to let us know the results!

1. Unplug the power cable from the back of the router, modem, or gateway for five minutes. If you have a router and a modem, unplug the power cable from both devices.
   
2. Press the Xbox button to open the guide.
3. Select Settings.
4. Select Restart console.
5. Select Yes to confirm.
   
   Note If you’re unable to access the guide, or if the console appears to be frozen, press and hold the
   Xbox button on the console for 10 seconds, until the console turns off. After the console shuts down, touch the
   Xbox button on the console again to restart.
6. After five minutes, plug the modem or gateway in first and wait for all the lights to return to their normal state.
   
7. If you are using a router, plug in the router and wait for all the lights to return to their normal state.
   

 

You can look up all error codes here.

Hopefully it will have a solution to your problem.

Xbox Error Status Codes | Xbox Support