Netgear: How to Find Firmware Version

Discus and support Netgear: How to Find Firmware Version in XboX Networking Hardware to solve the problem; Netgear (Routers): How to Find Firmware Version Netgear JNR3210 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Apr 27, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Netgear: How to Find Firmware Version


    Netgear (Routers): How to Find Firmware Version
    Netgear JNR3210

    Login Information

    Netgear Smart Wizard - Light Blue

    How to Find Firmware Version

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    4. From the left hand menu select Router Status.
    5. The firmware version will be listed as Firmware Version.


    Firmware Update

    Auto Update

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    5. The Netgear smart wizard will automatically search for updates upon login, if an update is available click install.
    Manual Update

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    5. Select Advanced from the tabs at the top.
    6. Select Administraion from the menu on the left.
    7. Select Router Update from the submenu.
    8. In an alternate web browser or tab go to www.NETGEAR.com and download the updated software. If not done automatically, un-compress the file.
    9. Click Browse.
    10. Locate and select the file you just downloaded and uncompressed.
    11. Click Upload to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router finishes
      restarting! When the Ready light stops blinking, wait a few more seconds before doing anything.
    12. Click Router Status and check the Firmware Version to verify that your router now has the new software installed


    Netgear Genie - Black/Purple

    How to Find Firmware Version

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Select the Advanced tab from the tabs at the top.
    4. Select Administration from the menu on the left.
    5. Select Router Status under administration.
    6. The Firmware version will be listed as Firmware Version.


    Firmware Update

    Auto Update

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    5. The Netgear smart wizard will automatically search for updates upon login, if an update is available click install.
    Manual Update

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    5. Select Advanced from the tabs at the top.
    6. Select administration from the menu on the left.
    7. Select Router Update from the submenu.
    8. In an alternate web browser or tab go to www.NETGEAR.com and download the updated software. If not done automatically, un-compress the file.
    9. Click Browse.
    10. Locate and select the file you just downloaded and uncompressed.
    11. Click Upload to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router finishes
      restarting! When the Ready light stops blinking, wait a few more seconds before doing anything.
    12. Click Router Status and check the Firmware Version to verify that your router now has the new software installed.


    :)
     
    XB1R Hades, Apr 27, 2014
    #1
  2. XB1R Hades
    XB1R Hades Guest
    Netgear: How to Find Firmware Version

    Netgear (Routers): How to Find Firmware Version
    Netgear JWNR2000

    Login Information

    Netgear Smart Wizard - Light Blue

    How to Find Firmware Version

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    4. From the left hand menu select Router Status.
    5. The firmware version will be listed as Firmware Version.


    Netgear Genie - Black/Purple

    How to Find Firmware Version

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Select the Advanced tab from the tabs at the top.
    4. Select Administration from the menu on the left.
    5. Select Router Status under administration.
    6. The Firmware version will be listed as Firmware Version.
     
    XB1R Hades, Apr 27, 2014
    #2
  3. XB1R Hades
    XB1R Hades Guest
    Netgear: How to Find Firmware Version

    Netgear (Routers): How to Find Firmware Version
    Netgear KWGR614

    Login Information

    Netgear Smart Wizard *

    *This router is “open source” meaning custom versions of firmware can be created for its use. This walkthrough is only intended to be used on the default stock version of the firmware.

    How to Find Firmware Version

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    4. From the left hand menu select Router Status.
    5. The firmware version will be listed as Firmware Version.
     
    XB1R Hades, Apr 27, 2014
    #3
  4. GMAN990 Win User

    Wireless adapter not connecting to 5GHz N, 2.4 G works fine though

    Hi, what version of firmware are you using on the Netgear?
  5. taidara Win User

    2 Xbox1s on one home network, how do I get Nat settings to open on both? - Take 2

    The Netgear Nighthawk R7000 (AC1900) should support multiple console support, if not Netgear have messed up any of their new firmware versions that is.
  6. GMAN990 Win User

    XBox360 not connecting to wireless network

    Criminal, see if there is a newer version of firmware to use on your Netgear, that might resolve it
  7. GMAN990 Win User

    Cannot connect to Xbox Live via wireless adapter

    Hi,

    Can you post up the version of firmware you are using on the Netgear
  8. GMAN990 Win User

    netgear wgr614v10 NAT strict

    Ok, can you also post up what version of firmware the Netgear is using
Thema:

Netgear: How to Find Firmware Version

Loading...

  1. Netgear: How to Find Firmware Version - Similar Threads - Netgear Find Firmware

  2. Netgear Netgear DGN3500: How to Find Firmware Version

    in XboX Networking Hardware
    Netgear Netgear DGN3500: How to Find Firmware Version: Netgear (Modems/Gateways) Netgear DGN3500: How to Find Firmware Version Login Information Gateway - 192.168.0.1 Username - admin Password - password How to Find Firmware Version Plug...

  3. Netgear Netgear DGN3500: How To Find Wireless Passphrase

    in XboX Networking Hardware
    Netgear Netgear DGN3500: How To Find Wireless Passphrase: Netgear (Modems/Gateways) Netgear DGN3500: How To Find Wireless Passphrase (WPA/WEP) Login Information Gateway - 192.168.0.1 Username - admin Password - password How To Find Wireless...

  4. Netgear Netgear DGN3500: How to Find SSID

    in XboX Networking Hardware
    Netgear Netgear DGN3500: How to Find SSID: Netgear (Modems/Gateways) Netgear DGN3500: How to Find SSID (Network Name) Login Information Gateway - 192.168.0.1 Username - admin Password - password How to Find SSID (Network Name)...

  5. Netgear Netgear DGN2200: How to Find Firmware Version

    in XboX Networking Hardware
    Netgear Netgear DGN2200: How to Find Firmware Version: Netgear (Modems/Gateways) Netgear DGN2200: How to Find Firmware Version Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard How...

  6. Netgear Netgear DGN2200: How To Find Wireless Passphrase

    in XboX Networking Hardware
    Netgear Netgear DGN2200: How To Find Wireless Passphrase: Netgear (Modems/Gateways) Netgear DGN2200: How To Find Wireless Passphrase (WPA/WEP) Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear...

  7. Netgear Netgear DGN2200: How to Find SSID

    in XboX Networking Hardware
    Netgear Netgear DGN2200: How to Find SSID: Netgear (Modems/Gateways) Netgear DGN2200: How to Find SSID (Network Name) Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard...

  8. Netgear Netgear DGN1000/DGN1000SP: How to Find Firmware Version

    in XboX Networking Hardware
    Netgear Netgear DGN1000/DGN1000SP: How to Find Firmware Version: Netgear (Modems/Gateways) Netgear DGN1000/DGN1000SP: How to Find Firmware Version Netgear DGN1000 Login Information Gateway - 192.168.0.1 Username - admin Password - password How to Find...

  9. Netgear Netgear DGN1000/DGN1000SP: How To Find Wireless Passphrase

    in XboX Networking Hardware
    Netgear Netgear DGN1000/DGN1000SP: How To Find Wireless Passphrase: Netgear (Modems/Gateways) Netgear DGN1000/DGN1000SP: How To Find Wireless Passphrase (WPA/WEP) Netgear DGN1000 Login Information Gateway - 192.168.0.1 Username - admin Password - password...

  10. Netgear Netgear DGN1000/DGN1000SP: How to Find SSID

    in XboX Networking Hardware
    Netgear Netgear DGN1000/DGN1000SP: How to Find SSID: Netgear (Modems/Gateways) Netgear DGN1000/DGN1000SP: How to Find SSID (Network Name) Netgear DGN1000 Login Information Gateway - 192.168.0.1 Username - admin Password - password How to Find...