Netcomm Netcomm NV6 Series: High Latency/Ping

Netcomm (Modems/Gateways) Netcomm NV6 Series: High Latency/Ping
Hey theTINMAN23,

If there is a high ping, this usually means there could be an issue with physical location or connections to the network. Make sure to check all wired leads and that their connections are tight and well placed, all connectors and connection points free of
debris, and try to eliminate as much possible interference from wireless access points as much as possible. It may be good to contact your internet service provider so they can test your home network for possible loops and circuit issues.

I hope this info helps, thank you!

:)

 

Netcomm Netcomm NV6 Series: Port Forwarding

Netcomm (Modems/Gateways) Netcomm NV6 Series: Port Forwarding
NetComm NV6

Login Information:

Default Gateway – 192.168.1.1

Username – admin

Password – admin



Port Forwarding

1. Open a web browser.
2. Enter http://192.168.1.1 in the address bar and press enter.
3. Enter “admin” for both the username and password in the resulting pop up.
4. Select Advanced from the menu across the top of the window.
5. Select Virtual Server from the menu on the left.
   
   Select Port Forwarding from the resulting submenu.
6. Click the Add button found at the bottom of the port forwarding table.
7. Select User defined.
8. Set the From Internet Host IP Address drop down to ALL.
9. Enter the IP Address of your Xbox console in the Forward to Internal Host IP Address space.
   
10. Set the Protocol drop down to both. If both is not available two rules will need to be created. One for TCP and the other for UDP.
    
11. Set all four Port Start/End fields to 3074.
12. Click the Apply button at the bottom of the screen.

Disable Port Forwarding

1. Open a web browser.
2. Enter http://192.168.1.1 in the address bar and press enter.
3. Enter “admin” for both the username and password in the resulting pop up.
4. Select Advanced from the menu across the top of the window.
5. Select Virtual Server from the menu on the left.
6. Select Port Forwarding from the resulting submenu.
7. Check the box to the right of any entries containing the port number 3074.
8. Click the Delete button found at the bottom of the page.

 

Netcomm Netcomm NV6 Series: Xbox one Ethernet connection ipv6 issue

Netcomm (Modems/Gateways) Netcomm NV6 Series: Xbox one Ethernet connection ipv6 issue
In general a wired connection does work better than wifi. Higher connection speeds, less signal loss & inference, and the physical cable is providing a connection for one device as opposed to multiple devices on wifi.

 

Since Battlefield 1 uses Electronic Arts servers, you need to contact the Electronic Arts support for that issue.

You say your PC works fine, and other games don't appear to have the same amount of high ping, I'm assuming it is an isolated problem with the Battlefield service.

So please contact EA at
https://support.ea.com

 

DDeve ser problemas com servidores da empresa do jogo....

 

I thought that may be the case, but its not limited to BF1 unfortunately. Just happens that I play that more than anything else currently.

My xbox still shows up with a high latency (with a wired connection) after running the detailed network statistic option.

I've currently contacted EA, and lets hope its on their end, but none of my mates seem to be having the same issue.

Thanks for replying!

 

Hey theTINMAN23,

If there is a high ping, this usually means there could be an issue with physical location or connections to the network. Make sure to check all wired leads and that their connections are tight and well placed, all connectors and connection points free of
debris, and try to eliminate as much possible interference from wireless access points as much as possible. It may be good to contact your internet service provider so they can test your home network for possible loops and circuit issues.

I hope this info helps, thank you!