Netcomm: Bridging Guide

Netcomm (Modems/Gateways): Bridging Guide
NetComm NV6

Login Information:

Default Gateway – 192.168.1.1

Username – admin

Password – admin



Bridging Guide

1. Open a web browser.
2. Enter http://192.168.1.1 in the address bar and press enter.
3. Enter “admin” for both the username and password in the resulting pop up.
4. Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI and VPI value, e.g.,
   1. VPI – 8
   2. VCI – 35
5. Then click the Next button.
6. On the Configure Internet Connection – Connection Type page, select Bridging then click the Next button.
   
7. On the WAN IP Settings page, select None for WAN IP address settings.
8. On the Configure LAN side Settings page, enter the IP address and subnet mask for your LAN, e.g.:
   1. Primary IP address: 192.168.1.1
   2. Subnet Mask: 255.255.255.0
9. Choose DHCP Server Off and click Next.
10. Check the network information on the Summary page. Make sure the contents match the settings provided by your ISP. Click Finish.
    
11. Refer to the TCP/IP properties, specify an IP Address, and fill in other information needed, e.g.:
    1. IP Address: 10.11.86.81
    2. Subnet Mask: 255.255.255.248
    3. Gateway: 10.11.86.1
    4. Preferred DNS server: 168.95.1.1
12. Click OK.

:)

 

Netcomm: Bridging Guide

Netcomm (Modems/Gateways): Bridging Guide
Login Information

• Gateway – http://192.168.1.1
• Username – admin
• Password – admin

Bridging Guide

*This feature is not available on this device.*

 

Bridging Guide

I can't switch it back. Now there is no network