Need help fixing error code

Hi

I have found a fix for the error code

FIX

Hope it helps

Greetings

Morosebadger

i have the same problem, error code 0xbba, i tried litteraly EVERYTHING on the web and it is not fixed yet, i need help !

https://support.xbox.com/en-US/help/errors/error-code-0x8015402B

Easy fix! Check the link above but looks like you just need to verify an email.

Error code support for error code (0x80070490) may assist.

Also check your network connection, whether its wired or Wifi. Damaged ethernet cable or interference with WiFi (wireless) signal can have a detrimental impact.

Hi, Forest. My name is Ron, I'm an independent advisor. I will be more than happy to help you.

Please do the steps below in sequence to do a factory reset and let me know if it works:

- Unplug the network cable if you're using a wired network connection.

- Power off your console, and then unplug the power cord to ensure that the console is completely powered off.

- Wait 30 seconds.

- Plug the power cord back in.

- Press and hold the BIND button (the one you use to sync controllers) and the EJECT button, and then press the Xbox button on the console.

- Continue holding the BIND and EJECT buttons for 10-15 seconds.

- Listen for two “power-up” tones a couple of seconds apart.

Note: If you don't hear two power-up tones after 15 seconds, it means this failed. Likewise, if you hear any “power-down” chirps, that also means this failed.

- You can release the BIND and EJECT buttons after the second power-up tone.

- The console should start and show the Troubleshooting screen

- Choose "reset this Xbox" and there you have an option to Keep Games and Apps (already downloaded) or to Remove Everything

If you have done that already and it doesn't work, please try doing the offline system update method by following the steps from this link, https://support.xbox.com/en-US/help/hardware-ne....