My xbox series x isn't restarting after 60% of update. .

I don't understand your answer very well, could you tell me if the problem persists?

Ok, according to a quick search I did, Generally this indicates that there are problems with the Hardware, but let's do something to rule out possible problems with the Software.

First of all, make sure that the console does not have any game disc inside, if this is the case, please remove it before starting the procedure:

1. Turn off the console and unplug the power cord for 30 seconds to make sure the console is completely off, then plug it back in but don't turn it on yet.
2. Press and hold the Pair and Eject buttons on your console, then press the power button on your console once while still holding down the Pair and Eject buttons.
3. Press and hold the Pair and Eject buttons for 10 to 15 seconds until you hear the console power-on tone again, once you hear it you can release the buttons.
4. The console should turn on and display the Xbox startup troubleshooter on the screen.

Once you have started the troubleshooter, try resetting the console by selecting reset this Xbox. When prompted, select Keep games and apps. This option will reset the operating system and delete all data that may be damaged, without deleting your applications or games. Finally, check if the problem is solved.

If the problem persists, then try performing an offline system update using the instructions in the following link:

https://support.xbox.com/help/hardware-network/console/offline-system-update

I hope this information is of great help to you.

Done this fine until it needs the update then when it gets too the restart process then doesn't come back on urggggh

I had the same issue, by accident when it turned off i pressed the xbox home button on the controller while it was connected through the back with a usbc cable, magically it turned back on without a beep sound and continued updating!!! Nothing else worked for me, mine sat stuck too when it turned off try this!

Hi Mark R! I hope you are well, delighted to be able to offer you my help!

I understand your problem, so I will try to help you as best as possible.

The first thing you should do is turn off the Xbox console by pressing and holding the Xbox button on the front of the console for about 10 seconds until it turns off completely.

Unplug the power cord from the console. Wait 10 seconds. Reconnect the console power cable. Press the console button on the Xbox to turn it on.

If the problem persists, you should try these other steps:

Turn off your console completely and remove the power and network cables for 30 seconds, then reconnect the power cable and proceed with these steps:

Step 1: Press and hold the Eject and Pair buttons on your console.

The Eject button is on the front of the original Xbox One console, right next to the disc drive, while the Pair button is on the left side, directly adjacent to the disc drive, with a symbol that looks like ")))" in it. . Note that on Xbox One X and Xbox One S, both buttons are on the front of the console, with the Bind button located directly below the Xbox button on the right edge. The Xbox One S Digital does not have an eject button, so the Bind and Xbox buttons will work. Once you're holding both buttons, press the Xbox (power) button on the front of the console.

Step 2: Release the Xbox button, but continue holding the Eject and Pair buttons for 10 to 15 seconds. Listen for two tones before releasing these buttons. The Xbox startup troubleshooter will appear shortly after.

Step 3: Select Reset this Xbox in settings and continue with factory reset (Saving your games and apps data).

Best regards,
Daniel.