My Xbox series s is not displaying on my TV

Thank you for your response.

Since you have already exhausted all the troubleshooting steps, the next best option you have is to check for your free Xbox series S console warranty repair order by signing your account and registering the serial number here on this link:

https://support.xbox.com/en-US/help/hardware-ne...

You will receive instructions on how to send your console to the Microsoft service center upon creating your free console repair order.

Thank you so much for your time. I hope you have a great day!

Hey there!

Nice to meet you! I'm Darhyl, a fellow gamer. I'm sorry you are experiencing this. I am here to help.

In order to fix this, you will need to perform a series of troubleshooting steps. You can skip the part if you're already done with it.

Confirm that both your TV and console are turned on

Check that your TV is set to the correct input signal (HDMI)

Check that the HDMI cable connections to your console and to your TV are secure

Confirm that the HDMI cable is connected to the "out to TV" port on the console

Plug the HDMI cable into a different HDMI port on your TV

Use a different HDMI cable to connect your console to your TV

Connect your console to a different TV

Power cycle your console by pressing and holding the Power button for 10 seconds to turn off the console, and then turning it on again

Then reset your display settings.

If there's a disc in the console, eject it.

On the console, press and hold the Power button on the front of the console for 10 seconds to turn off the console.

Press and hold the Power button and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. Don’t let go until you hear the second beep or see the console start up in low-resolution mode (the Xbox startup screen will appear slightly pixelated).

Note If you have an Xbox Series S or Xbox One S All-Digital Edition, press and hold the Xbox button  and the Pair button  instead, as your console doesn’t have an Eject button.

In either case, this will start up your console in low-resolution mode (640 × 480).

To change this setting, press the Xbox button  on your controller to open the guide. Go to Profile & System> Settings > General > TV & display options, and then select the resolution that you want from the options under Display.

Please take your time and let me know if the TV display on your Xbox console works.

Reference link: https://support.xbox.com/en-US/help/hardware-ne...

Thank you so much. If you don't have any more questions, feel free to choose a rating, and have a great day!

ill definetly try too and its a little better knowing I can get it repaired and i appreciate the help even through my frustration i hope you have a great rest of your day as well

As i stated before i already did all of this multiple times and still nothing it has happened before but worked just fine later on without me doing anything but now it seams nothing I do is working and I can't afford another console as I do not currently have a job amd seeing this as a fault of hardware I would be a little scared to purchase another and have this happen again only months of owning it and now it's not making the first start up chime either