My Xbox controller geekin out and I need help

The A-10 is one of my favorite aircraft next ot the F-117A Nighthawk. I think the first thing i will do in BF3 is find a empty server on the PC and just fly around like geekin out.

Hi Tyron, my name is Oskayra, it is my pleasure to answer your question.

I have experience with that error the PowerA Advantage driver you received needs an update and the paddles will not work until the update is done.

To update the driver, follow the steps below:

1) Connect the driver to the PC using a USB cable.

2) Open the PowerA HQ application.

3) Click the "Update Driver" button.

4) Follow the on-screen instructions to complete the update.

5) Once the update is complete, the paddles should work properly.

Here are some additional tips for updating the controller:

1) Make sure the controller is connected to a USB 2.0 or 3.0 port.

2) If the update does not start automatically, click the "Update Driver" button again.

3) If the update fails, try restarting the PC and the controller.

If you have followed these steps and the paddles still do not work, you can contact PowerA technical support.

Here is a direct link to PowerA's technical support page:

https://www.powera.com/support/
Note: This is a non-Microsoft web site. The page appears to provide accurate and secure information. Beware of advertisements on the page that may advertise products often classified as PUPs (potentially unwanted products). Thoroughly research any product advertised on the site before deciding to download and install it.

Keep in mind that in this public forum we are just gamers like you trying to guide and help other gamers. We are not Microsoft employees.

I appreciate your understanding and I hope the problem will be solved soon, I wish you good luck and have a nice day.

Regards, Oskayra

when you pin someone you have to make sure you have worked on them enough that they are weakened from your attacks... from the way it sounds is like you havent done enough moves on them to wear them down so that when you do hit your finisher its enough to
put them down. when your doing your submission you need to be pressing your face buttons, A,B,Y,,X

The fix was very simple but out of my control. My ISP needed to add my xbox static ip to their 'listings'. Hopefully this helps others

Hi Curly!

Thanks for reaching out to us with this question. The warranty for Design Lab controllers is 120 days (6 months). You can use this article (Xbox
Design Lab and Xbox Design Lab controller help) for any troubleshooting you need for your controller. If you do need servicing for your controller, you can set it up at https://support.microsoft.com/devices.

I hope that this information helps out!