Latest Update Bug Energy Saving Mode Not Working

/u/waredati · Feb 9, 2020

If you recently ran the latest update (1/2020) for your Xbox One X console, the Energy Saving Mode is not working immediately after when you hold down your controller for shutdown. You need to power down completely (Full Shut Down) in the Settings menu. However, it works after you restart afterwards.
Original post from: LoganX23

submitted by /u/waredati
[link] [comments]

depressed brute

Hi there, i had the same problem but iam with the xbox insider team and i already report it.

NaZoooom

Hi LoganX23,

Thanks for posting /sharing this. I would say it is best to report bugs like this to the Xbox Insiders Reddit page. This is where you can submit ideas, suggestions and
report bugs to help improve the Xbox experience.

chucky23456789

thank you for letting everyone know

SwordofWhedon

In the latest firmware update all consoles were set to energy saving mode by default

You can adjust it tin power

Don't reset your console

RobertBuckalew

xbox one is constantly updating your friends and feeds and so on , but it should not be doing it in energy-saving mode , it should be ALL the way off , that's why it takes so long to boot up in that mode...maybe yours isn't in that mode or it isn't working
properly...

Energy-saving power mode

In energy-saving power mode, your console is shut down to save energy. In this mode:

•Updates are not downloaded and installed until your console is turned on.

•Your console takes 45 seconds to start up.

•You must press the Xbox button to start the console.

Notes

•In energy-saving mode, the PSU is in off/standby mode and the solid orange LED on the PSU is bright.

•The console uses 0.5 watts of power when in energy-saving mode.

so if the psu is off , I don't see how it could use the internet...

Latest Update Bug Energy Saving Mode Not Working